Daft Punk Guy Manuel Helmet (wearable)
por Joseph Cortez en MyMiniFactory
This is the left hand side to the Guy Manuel Daft punk Helmet, need to flip to get right hand side.
Licencia
Solo uso personalMyMiniFactory - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Joseph Cortez.
Archivos (29)
- 1 Backbar V1 5.Stl STL
- 10 Fan 3L V1 5.Stl STL
- 11 Fan 4L V1 5.Stl STL
- 12 Fan 5L V1 5.Stl STL
- 13 Fan 6L V1 5.Stl STL
- 14 Fan 7L V1 5.Stl STL
- 15 Fan 8 Bottoml V1 5.Stl STL
- 16 Sidebottom V1 5.Stl STL
- 17 Sideshroud Bb V1 5.Stl STL
- 18 Sideshroud Bf V1 5.Stl STL
- 19 Sideshroud Tb V1 5.Stl STL
- 2 Backwireharness V1 5.Stl STL
- 20 Sideshroud Tf V1 5.Stl STL
- 21 Sidetop V1 5.Stl STL
- 22 Topbar V1 5.Stl STL
- 23 Visorbottom V1 5.Stl STL
- 24 Visormidbottom V1 5.Stl STL
- 25 Visormidtop V1 5.Stl STL
- 26 Visorsidevacsupportback V1 5.Stl STL
- 27 Visorsidevacsupportfront V1 5.Stl STL
- 28 Visorsidevacsupportmid V1 5.Stl STL
- 29 Visortop V1 5.Stl STL
- 3 Chinlightmount V1 5.Stl STL
- 4 Chin V1 5.Stl STL
- 5 Circuitpannel V1 5.Stl STL
- 6 Earcupelectronicsbracket V1 5.Stl STL
- 7 Earcuplr Electronics V1 5.Stl STL
- 8 Fan 1 Topl V1 5.Stl STL
- 9 Fan 2L V1 5.Stl STL
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 2,275
- Publicado
Sobre este modelo
This is the left hand side to the Guy Manuel Daft punk Helmet, need to flip to get right hand side.
I receieved this from Thingiverse from Bendiger, just thought it should be shared more.
Bendigrs summery,
If you like this design, buy me a beer :) http://www.thingiverse.com/bendiger/about
UPDATE 09-17-16 Thanks to all the hard work of Nathan720 (http://www.thingiverse.com/Nathan720), there is now an instructables post for how to build the helmets! http://www.instructables.com/id/Two-Daft-Punk-Helmets-in-One-Month/
It's what everyone has been waiting for! The Daft Punk Guy Manuel 3D Printable helmet for small printers! All the parts are for the left side and just need to be mirrored to print the right. Set the X scale to -1 This design is for small 3D Printers with print beds 6x6in or bigger. All parts Zip tie or glue together. Support Material is a must for most parts. These are not optimized for supportless printing due to there shape. About 60 hours of printing so far, and 1 reels of 3mm abs. It will be compatible with the AlexPlusLEDs fans and chin lights which can be found here: http://alexplusleds.bigcartel.com/ STL files are orientated for printing on a 6x6 bed. The visor mold that will soon be included can be used to make your own clear visor form for vacuum forming. Want the Thomas Bangalter Helmet? Here it is: http://www.thingiverse.com/thing:338831 ---UPDATES--- 06-27-15 Well, I should have updated this a while back. All the files are updated and scaled to match the Thomas Helmet. Hopefully they look good and work better size wise. 10-16-14 I uploaded a quick Back Wire Harness for the wires on the back of the head. Its simple and will be updated to have groves to hold the wires in place. 10-04-14 I've uploaded the visor mold and the support parts. All parts should be mirrored and glued together very well to handle vacuum forming. I suggest a good thick coat of epoxy or bondo on the inside of the mold to avoid cracking during forming. Please let me know if there are any problems with slicing, some of the parts were a rush job and didn't need to look pretty. Also, I have uploaded the ear cups and side panels. The ear cup is not ready for electronics, it was uploaded because of a request.
Props to this guy donate to him on thingiverse!
Descripción original del autor, publicada en MyMiniFactory.
