daft punk guy manuel helmet
A heavily modified version of this: https://grabcad.com/library/daft-punk-helmet-4
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a jordy m.
Archivos (11)
- chin.stl STL · 814 KB
- ear_left_good.stl STL · 1008 KB
- ear_left_inside.stl STL · 551 KB
- ear_right_inside.stl STL · 551 KB
- ear_right.stl STL · 1,2 MB
- guy_full.stl STL · 4,0 MB
- guy.stl STL · 5,5 MB
- head_back_underside.stl STL · 1,1 MB
- head_back_upper_side.stl STL · 1,9 MB
- visor_underside.stl STL · 1,5 MB
- visor_upper_side.stl STL · 1,5 MB
- Categoría
- Cosplay y props
- Formatos
- STL
- Descargas
- 532
- Publicado
Sobre este modelo
A heavily modified version of this: https://grabcad.com/library/daft-punk-helmet-4
Full sized Daft punk guy manuel helmet printable on a 230x230 print bed.
Not as accurate as my thomas model but i don't have the time anymore for it
This is NOT an easy project if you want to make it look perfect, It still requires many hours of filling and sanding before painting if you want a smooth finish without visible seams.
I assembled it by first taping it together and then welding the pieces together from the inside with a soldering iron and i melted some scrap support material with it as extra reinforcement. Don't heat it too much or it will deform.
The visor has a bit of flat spots on both sides that i didn't see on the 3d drawing. You can fill those in with filler if that bothers you.
Descripción original del autor, publicada en Thangs.
