Cycle bottle cage
por Franc Falco en Thingiverse
Couldn't find any nice one-piece example on Thingiverse so... Designed and modelled this. Print with low infill - to keep the weight down! Printed with PLA 3 walls @ 20% infill = 29g – similar weight to Carbon fibre! No rafts or supports needed. Enjoy! UPDATE: 10 July 2015 I've removed the original.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Franc Falco.
- Categoría
- Jardín
- Formatos
- STL
- Descargas (todas las plataformas)
- 16,779
- Publicado
También en
Sobre este modelo
Couldn't find any nice one-piece example on Thingiverse so... Designed and modelled this. Print with low infill - to keep the weight down! Printed with PLA 3 walls @ 20% infill = 29g – similar weight to Carbon fibre! No rafts or supports needed. Enjoy! UPDATE: 10 July 2015 I've removed the original version and updated with a v2. This one is stronger at the base and i've also removed the centre area. Print with high infill. UPDATE: 2 June 2016 Created a v3 version with a thicker/stronger profile - print with high infill. V2 is still valid if your printer/material layer bonding is set up correctly.
Descripción original del autor, publicada en Thingiverse.
