Cyberpunk 2077 Johnny Silverhand's Malorian Arms 3516 screw assembly and more accurate details

Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a Prusa Mini. (in prusa slicer) (new model versions need to be equipped with the older ones support and seam) Support suggestion: use “on build plate only”: organic on the 2 big parts and snug everywhere else. You can use superglue on most of the places if you want, but I like it if things can be disassembled. Suggested screws: M3, (mostly) countersunk (first number is needed, second is optional) - 5 mm 2+2 pcs - 10 mm 2+1 pcs - 16 mm 5+2 pcs - 20 mm 5 pcs - 20-30 mm 2 pcs

M3 Nut 6+5 pcs (You can add 2 into the grip and some to the spring) Some kind of spring or rubber band. Small amount of any weak glue or glue pads. You can asseble it without a spring/rubber but there is nothing to hold the slide in place. The main frame has 3 versions (things on the side), the rotary thing has 2 (text in/out). You can put a bullet inside of the barrel from the back and also under the slide (it can hide the electronics) 3 or 4 pieces of electronics can be placed: - The 2 signature LEDs can be put in the rotary thing with enough room for a battery. - On the top of the grip there are 2 red LEDs. - There are 2-3 LEDs in the front pod. - If You choose to put a laser in that pod.

2-3-4 can be powered from the magazine. Paintings: - Magazine and the shine things: Revell enamel steel (91) - Grip: Revell enamel satin purple red (sm 331) painted on the inside - Everything else is the Fuse 1's own PA12's original color.

The prototype was printed entirely on Prusa Mini. The final version was printed on Formlabs Fuse 1 and the grip was printed on a Phrozen sonic mini 8k.

If you like the model, please consider supporting the original creator and/or me. BTC: bc1qzrppwsp9fh0evyxkf9lpmlfv7gstltuskftl9y