Cyber Oni-Samurai 13

⚔️ Cyber Oni-Samurai 13 – Dummy 13 Custom Figurine

A cybernetic Oni warrior brought to life! This figurine is built on the Dummy 13 platform, scaled up to 150% to better capture the intricate details of the face, horns, and armor.

The design is split into 4 plates, making it easier to manage the build, mix materials, and customize your colors.

--- 🧩 Plates & Print Setup

Plate 1 – Frame - 🔧 Best printed in PETG (recommended for joints). - ABS/ASA works best for long-term durability. - PLA is not recommended (stiff, brittle, and creeps under stress), though it can work if it’s all you have. - ⚠️ Expect tighter joints, possible snapping, and loosening over time if you go with PLA.

(Frame material recommendations adapted from @soozafone’s original Dummy 13 v1.0 post.)

---

Plate 2 – Head Armor - 🎨 Printed with PLA (AMS multi-color setup). - Easier to swap AMS filaments than to paint the head (though painting works too). - Recommended Settings: - Layer Height: 0.12 mm - Supports: Tree Supports Slim - Be gentle removing supports from the hair – proper calibration will give you a clean result. - ✅ I ran a full calibration and maintenance pass before printing the head, highly recommended.

---

Plate 3 – Armor - Printed in PLA. - Designed for multi-color printing – most parts are separated for easy AMS swaps. - ⚠️ Chest piece is not separated (too late in the design to redo). - Supports: Tree Supports Slim are required.

---

Plate 4 – Sword & Sheath - Printed in PLA. - Simple weapon accessory to complete the Oni-Samurai aesthetic.

--- 🎨 Filament Recommendations

Armor parts: - Works with PLA, PETG, or ASA.

Frame parts: - Best with ABS/ASA, PETG also works. - PLA is possible, but expect issues with joints over time.

--- ⚔️ Final Notes - Platform scaled up to 150% for better detail. - Total: 4 plates. - Color scheme is flexible – swap filaments in AMS or remix your palette.

--- 🧵 Recommended Filaments (Affiliate Links) If you’d like to try the filaments I use and support my work, here are affiliate links (I may earn a small commission at no extra cost to you):

PLA Filaments - Overture PLA (https://amzn.to/3V8SXac) - Polymaker PLA (https://amzn.to/45pdmhj) - Anycubic PLA (https://amzn.to/45VPK3T)

PETG Filaments - Overture PETG (https://amzn.to/4mIeTog) - Elegoo Rapid PETG (https://amzn.to/4oGvpqD) - Anycubic PETG (https://amzn.to/4fMKTFG)

---