Customizable wall organizer

Customizable wall organizer - I build this project to organize tools, the organizer can be build in any size you want (one wall plate is 100x100mm), it offers many brackets, holders and bins.

- You can easily remix this project or add any part thanks to the Fusion file in the files.

- There are 8 different mounts, 4 plates end (each one is different for its own size, -top, right, left, bottom). They can also be combined for example you can use two hooks to hold something longer.

- Wall plate hole is 5 x 10mm, with 2mm fillet on each inner corner. The outer mounts on the brackets are 9.8 x 4,8mm with 2mm filler on the outer corners.

- (Each part description below):

- Bin, size 50 x 50 x 100mm, solid bottom. Can be used to store stuff -for example pens, pencils, ...

- Bin, size 50 x 50 x 50mm, solid bottoms. Same function as the first bin.

- Bracket, size 50 x 25 x 20mm, no bottom. Used for pliers, scissors or anything that has two handles.

- Mount with two hooks, 50 x 20 x 25mm. Used for anything that can be put on these flat hooks.

- Mount with one hook, 50 x 20 x 25mm. Used for anything that can be put on one of this flat hook.

- Four slot mount, 110 x 60 x 15mm. Used for screwdrivers, or anything that extends from the base, the inner empty diameter is 10mm.

- Small slim hook, 20 x 5 x 30mm. You can combine more of these in one row to hold for example a level or calipers.

- Slim hook, 20 x 5 x 45mm. Same but larger (more height).

- Wall plate 100 x 100 x 5mm. You can stack as much of these as you want. Tolerances kept in mind. You can use an end bracket to hide the mount "(small hooks)" coming out of it.

- End brackets, 100 x 15 x 5mm. These go to the ends of the wall plates. Each end of the plate has its own type!

Assembly instructions: - Mount the plates, plates back ends.

- Slide the bin into the plate and then down. And now you are done! You can use this combine as much plates and brackets you want!