Customizable Fidget Spinner Ring

These fidget rings have a wide array of uses. From wearable, always ready and available stress relief to functional and appropriate stimulus for those who suffer from ADHD or other sensory issues these rings can provide a hidden non-obtrusive outlet.

When many people think of assistive technology they only think about devices that help disabled people do something they can't normally do. What many don't understand is that assistive devices can also be related to helping people function throughout their day.

Create your own! Choose a ring size and thickness of the ring and Print! Super easy right!?

Don't forget to post pictures! What color combos are you going to use.

See it in action...

UPDATE V1.2

Added the ability to customize the spinner with the Knurl and Band library modules! Go at it people!

UPDATE V1.3

Added the ability to manually input ring size if "manual" is selected in the ring size selector drop down menu. Added more preset ring sizes.

UPDATE V1.4

Added the option to only view individual parts, only the ring parts or all three together. When published each piece will be created individually as well as an altogether plate AND an .STL for only the ring parts (no spinner). Hopefully this will make multi-color printing easier and prevent needless filament use to do more than one color.

UPDATE V1.5

Now you can customize your ring with a cool message! Added the ability to change the height and size of the font as well to get the perfect alignment! You can also cut the letter show the ring color shows through the spinner. Be aware that letters with holes may not print correctly.

Print instructions Unassociated tags: #AssistiveTech

Category: Rings Print Settings

Rafts: Doesn't Matter

Supports: No

Resolution: 200 Micron or finer

Infill: 100%

Notes:

I have had various success with lowering the infill. I find that 100% works best.

You may need to run a knife or sandpaper along the inside of each piece to get rid of any spurs that may develop naturally from the printing process.

See instructions for more information.

Instructions

This is an easy print.

No supports or raft needed.

No glue needed.The rings fit super snug and can be held together with their own created pressure.

Print these pieces @

2mm layer height (1mm works too but 2mm looks the best IMO)

1 shell