Customizable 100Hex
por Outward Buckle en Thingiverse
Also on printables - https://www.printables.com/model/150327-customizable-100hex Updated - 12th Nov 2021 - Change log at the bottom of this page I recently discovered the 100Hex project by tecnoloxia_org and decided I would challenge myself to add a load of hex designs. These have all been created..
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Outward Buckle.
Archivos (66)
- Customizable_100Hex_V1_6.scad SCAD · 47 KB
- Customizable_100Hex_V1_6.json JSON · 59 KB
- 01_Windmill.stl STL · 168 KB
- 02_Aperture.stl STL · 22 KB
- 03_Bahtinov.stl STL · 141 KB
- 04_Bahtinov-Alt.stl STL · 153 KB
- 05_Carey.stl STL · 126 KB
- 06_Cross.stl STL · 169 KB
- 07_Crosshair.stl STL · 278 KB
- 08_Crosshair-alt.stl STL · 313 KB
- 09_CrossHex.stl STL · 45 KB
- 10_CrossHex-alt.stl STL · 63 KB
- 11_CrossHex-Alt2.stl STL · 41 KB
- 12_CrossTri.stl STL · 75 KB
- 13_CrossTri-alt.stl STL · 53 KB
- 14_CrossTri-alt2.stl STL · 51 KB
- 15_CrossTri-alt3.stl STL · 111 KB
- 16_CrossTri-alt4.stl STL · 114 KB
- 17_Brick.stl STL · 302 KB
- 18_Dot.stl STL · 1,1 MB
- 19_Fancy.stl STL · 2,3 MB
- 20_Fancy-alt.stl STL · 978 KB
- 21_Fancy-alt2.stl STL · 714 KB
- 22_Grid.stl STL · 165 KB
- 23_Grid-alt.stl STL · 183 KB
- 24_Hex.stl STL · 333 KB
- 25_Spiral.stl STL · 322 KB
- 26_Spiral-alt.stl STL · 454 KB
- 27_Spiral-alt2.stl STL · 251 KB
- 28_Spiral-alt3.stl STL · 380 KB
- 29_Square.stl STL · 59 KB
- 30_Teardrop.stl STL · 467 KB
- 31_TriGrid.stl STL · 110 KB
- 32_ZigZag.stl STL · 121 KB
- 33_PiLines.stl STL · 4,9 MB
- 34_Half-Loop.stl STL · 1,8 MB
- 35_CrossRing.stl STL · 943 KB
- 36_CrossRing-alt.stl STL · 486 KB
- 36_CrossRing-alt2.stl STL · 1,0 MB
- 37_Batman.stl STL · 2,3 MB
- 38_IIS.stl STL · 1,8 MB
- 39_Spiderman.stl STL · 3,0 MB
- 40_RubiksCube.stl STL · 4,0 MB
- Custom_Hex.stl STL · 2,0 MB
- 41_DeathStar.stl STL · 10,5 MB
- 42_Heart.stl STL · 3,0 MB
- 43_Ironman.stl STL · 4,3 MB
- 44_Sin_Waves.stl STL · 43,5 MB
- 45_Square_Panels.stl STL · 423 KB
- 46_Square_Panels_Alt.stl STL · 561 KB
- 47_Square_Panel_Alt_01.stl STL · 62 KB
- 48_Square_Panels_02.stl STL · 129 KB
- 49_Masu-Tsunagi.stl STL · 743 KB
- 50_Shippou-Tsunagi.stl STL · 3,2 MB
- 51_Rectangle_Panel.stl STL · 202 KB
- 52_Tsutsuidutsu.stl STL · 252 KB
- 53_Tsutsuidutsu_alt.stl STL · 226 KB
- SVGs.zip ZIP · 726 KB
- heart.svg SVG · 14 KB
- 2d-spider.svg SVG · 6 KB
- Categoría
- Figuras y arte
- Formatos
- SCAD, JSON, STL, ZIP, SVG
- Descargas
- 22,296
- Publicado
Sobre este modelo
Also on printables - https://www.printables.com/model/150327-customizable-100hex Updated - 12th Nov 2021 - Change log at the bottom of this page I recently discovered the 100Hex project by tecnoloxia_org and decided I would challenge myself to add a load of hex designs. These have all been created in OpenSCAD so I've also created a customizable version. If the customizer isn't working today, check out the guide for using OpenSCAD to customize this and other things. A load of these patterns are taken from my Customizable Fan Grill Covers This could be considered work-in-progress as I'll continue to add patterns/features over the next few weeks/months. A few ideas for displaying the hexs: - Use a wall frame - Box Lid - Coasters - Glue it to some card or a surface - kakiemon has created an awesome Belt designer using the patterns!
Note: Some of the hexes in the first two images, and everything from the third image is from other creators. Check the credit section for more info.
Descripción original del autor, publicada en Thingiverse.
