Curled Witch Boot Pen Holder with Accessory Pocket

A witch-boot pen holder with a curled toe, sculpted sole, buckle and stars. The tall boot shaft stores pens; a lower vamp pocket keeps clips and small accessories separate. Dimensions and storage layout can also be adjusted on the model page: https://boxesmodel.com/models/halloween-curled-boot-organizer Overall dimensions, subdivisions inside the boot shaft and wall thickness can be adjusted while the sculpted exterior is retained. The files here are the complete fixed default-size version. Custom exports follow the pricing shown on the model page. DEFAULT SIZE AND ASSEMBLY 185 x 95 x 140 mm overall. Shaft centre depth: 56.3 mm; centre clear width: 59.4 mm; usable height: 112.2 mm. The shaft is tapered and oval. One body; no hardware. The curled toe is solid decoration, not a hanging hook. Review the curl and buckle for supports; no load rating is claimed. Dimensions are in millimetres. Each STEP is an alternative CAD format for the matching STL, not an extra piece to print. PRINT STATUS AND COLORS Geometry, dimensions and part completeness were checked in CAD. This model has not been sliced or physically test-printed. Review orientation, supports and tolerances in your slicer. No tested print profile, print time or G-code is supplied. The cover is a render of the actual model, not a photograph. STL and STEP contain uncolored geometry; illustrated colors require painting or slicer coloring. No AMS/MMU-ready multicolor 3MF is included. Food-contact performance has not been validated; use wrapped sweets if storing treats. CREDITS AND LICENSE Created for boxesmodel with AI-assisted parametric CAD development. © 2026 boxesmodel. CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/ Personal noncommercial printing is permitted under the license. Credit boxesmodel with source and license links when sharing the original files. Do not distribute modified versions; the linked license contains the full terms.