Cup / Mug hanger
por Bob Waugh en Thingiverse
A simple cup/mug hanger that can be screwed to the underside of a shelf that hold 3 cups or mugs. Printed in PLA at a layer height of 0.2mm at 100% fill. Held in place under the shelf with 2 screws, the length depends on the thickness of the shelf. Mine took just under 2 hours to print. Update...
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Bob Waugh.
Archivos (3)
- Categoría
- Organización
- Formatos
- STL
- Descargas
- 21,915
- Publicado
Sobre este modelo
A simple cup/mug hanger that can be screwed to the underside of a shelf that hold 3 cups or mugs. Printed in PLA at a layer height of 0.2mm at 100% fill. Held in place under the shelf with 2 screws, the length depends on the thickness of the shelf. Mine took just under 2 hours to print. Update 18/1/18 - A shorter 2 cup version has been added for those with smaller printers Update 21/8/22 - A 3 cup hanger with extra centre screw hole for additional support.
Descripción original del autor, publicada en Thingiverse.
