Crystal Bee - HueForge Print

This HueForge print of a bee is a dual lithophane/filament painting print! If you hold it up against a light source, our use it in a light box, the print glows. If you don't, the print still looks pretty awesome!

If you want to resize the print, please ONLY resize the X and Y dimensions, and not the Z height.

The 3MF file will already have the filament swaps loaded for you if you're using Bambu Studio. Otherwise, if you do not want to use that, you can download the STL and use the print instructions below:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used: - PLA Kingroon White Transmission Distance: 8 - PLA CC3D Lemon Yellow Transmission Distance: 8 - PLA CC3D Orange Transmission Distance: 7.4 - PLA Kingroon Black Transmission Distance: 0.4

Swap Instructions: - Start with White - At layer #5 (0.36mm) swap to Lemon Yellow - At layer #13 (0.68mm) swap to Orange - At layer #21 (1mm) swap to Black for the rest. __________ If you'd like my work and would like to support me, you can now subscribe to a Thangs membership plan!

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.

If a Thangs Membership is not your thing, I also have a Patreon (https://www.patreon.com/cyanidesugar3DP) that gives you the same perks! ____________