CR touch Zero Offset probe backplate mount
por tsuga en Printables
For Ender 3 S1. Offset X=-47mm, Y=0mm
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a tsuga.
Archivos (3)
- Categoría
- Para tu impresora
- Formatos
- STL, 3MF
- Descargas
- 1,547
- Publicado
Sobre este modelo
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is warped). It also allows for more area of the bed to be probed. Heatbreak fan cover included for better ergonomics when loading/unloading filament. This part is designed to require no re-wiring or additional hardware.
Print settings for PLA: .2mm layers 3 perimeters 4 top/bottom layers 10% infill No supports for V1 and V2, Supports needed for V3 40-60 mm/s speed
Note: I printed with PLA and it has held up well for printing PLA, ASA, and PETG.
V2 edit: Increased clearance on right side mounting tab by .3mm to allow for larger printing tolerances.
V3 edit: Increased probe mounting height by 1mm for more clearance. Added PTFE filament tube holder for printing from drybox. Weight-reduction modifications and some aesthetic changes.
Descripción original del autor, publicada en Printables.
