Cozy Cabin - No AMS (or similar system) required
UPDATE December 5, 2024 Missing window has been added. I am so sorry I missed that! It is also included in the _windows.3mf_ and _windows.stl_ file
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesModel License 10-2025
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Eric P.
Archivos (23)
- Side Door.stl STL · 36 KB
- Windows.stl STL · 527 KB
- Roof.stl STL · 52,8 MB
- Cabin.stl STL · 1,1 MB
- Everything else.3mf 3MF · 548 KB
- Chimney.stl STL · 63 KB
- Pillars.stl STL · 263 KB
- Lamp Interface.stl STL · 504 KB
- Front Porch.stl STL · 78 KB
- Back Porch.stl STL · 121 KB
- Railings.stl STL · 461 KB
- Roof and Cabin.3mf 3MF · 14,2 MB
- Front Door.3mf 3MF · 67 KB
- Side Door.3mf 3MF · 45 KB
- Windows.3mf 3MF · 134 KB
- Porch Lattice.3mf 3MF · 71 KB
- Chimney Smoke.3mf 3MF · 1,4 MB
- Fitment Test.stl STL · 98 KB
- Chimney Smoke.stl STL · 4,9 MB
- Porch Lattice.stl STL · 193 KB
- Front Door.stl STL · 57 KB
- Cabin_Cozy Cabin v87_Front Door Window.stl STL · 49 KB
- Cozy Cabin Assembly Guide.pdf PDF
- Categoría
- Figuras y arte
- Formatos
- STL, 3MF, PDF
- Descargas
- 1,550
- Publicado
Sobre este modelo
UPDATE December 5, 2024 Missing window has been added. I am so sorry I missed that! It is also included in the _windows.3mf_ and _windows.stl_ file
This model makes use of Bambu Lab's Lamp Kit (http://store.bambulab.com/products/led-lamp-kit-001), but should accommodate any light source you have available to you
If anything could ever make you wish you could shrink down and live in a small house, this certainly would!
Light up your home with this Cozy Cabin Lamp decor!
Invite your neighbors over to look at it so they can know you're better than them! (j/k, don't do that)
A tolerance test is included so you can gauge how well tuned your printer is before starting on this model.
Assembly Instructions: Refer to the attached guide for assembly You can also refer to this video (https://youtube.com/shorts/ICsBV8rnW5E?si=d8xEgK-AXVCrP21P)
Printing Instructions: Several components of this cabin utilize the "color swap" technique to mimic the capabilities of a multi-color printer. Anyone with a printer with pause capabilities can do color swaps.
There are 3mf files included that were created from Bambu Slicer that already have the settings below applied.
Roof: - Layer Height: 0.2mm - Supports: Tree/Organic supports
Cabin: - Layer Height: 0.2mm - Supports: Tree/Organic supports
Chimney Smoke: (This will make it so your smoke glows with the rest of the cabin) - Layer Height: 0.2mm - Wall generator: Arachne - Bottom shell layers: 0 - Infill density: 0% - Wall loops: 1 - Brim: Outer brim - Brim width: 15mm - Brim object gap: 0.1mm
Windows: - Layer Height: 0.1mm - First Layer Height: 0.1mm - Pause at Layer 3 for color swap - Pause at Layer 21 for color swap
Side Door: - Layer Height: 0.1mm - First Layer Height: 0.1mm - Pause at Layer 3 for color swap - Pause at Layer 31 for color swap
Front Door: - Layer Height: 0.2mm - Pause at Layer 29 for color swap
Porch Lattices: - Layer height: 0.2mm - Pause at Layer 3 for color swap
Everything else: - Layer Height: 0.2mm - Supports: No
Don't be afraid to give me feedback if you feel something can be improved!
Feel free to join my discord (https://discord.gg/tdxE35eZwF) for additional support, questions, or suggestions!
Descripción original del autor, publicada en Thangs.
