CORE One L Pins Mod 5G
por DET-Man en Printables
The missing pieces to bring the mechanical improvements of the Pins Mod 5G also to your 🥰 CORE One L
Licencia
Revisa las condicionesEl autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a DET-Man.
Archivos (3)
- Categoría
- Para tu impresora
- Formatos
- 3MF, F3D
- Descargas
- 59
- Publicado
Sobre este modelo
This is the CORE One L companion model to the CORE One Pins Mod 5G. It brings the same pin-based idler mounting upgrade to the Prusa Core One L, replacing the standard M3 bolts used for idler mounting with 5mm steel axles (pins) and genuine Gates idlers. This model contains only the two XY motor mounts adapted for the CORE One L. All other parts — the XY carriage, belt tensioner pulley, spacers, and tools — are identical to the original CORE One Pins Mod 5G ...and the same is true for full assembly instructions, print settings and BOM. Happy printing ... and don't forget to leave a ❤ Like! Print Settings
Seam Placement
Make sure the slicer does not position the seam close to the idlers. Just as an example, the picture shows the region to avoid for the Belt Tensioner part, do the same for the Motor Mounts.
Recommended print settings: - Filament: PC-CF
- Layer Height: 0.2mm
- Infill: 40%
- Perimeters: 4
- Top/Bottom Layers: 5
- Support: No
Descripción original del autor, publicada en Printables.
