Coraline

Coraline

As a request from a user, Coraline, inspired by the character from Coraline. This figure captures her inquisative spirit, includes her iconic yellow rain jacket and boots. With her blue hair, dragonfly hair clip and recognisable design.

Perfect for Coralie lovers, or as a general decoration for or all year round! NO AMS, printed in parts and assembled, all that is needed is some time and some glue to keep everything together permenently.

AMS PROFILES ARE AVAILABLE

Assembley is simple but be patient, rushing and not allowing things to sit properly will lead to small parts falling out.

📌 Recommended printing settings:

- Material: PLA

- Layer height: 0.16 mm

- Infill: 15% - 8% on main body

- Nozzle: 0.4mm

supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal

Assembly – Recommended Method on multipart models

- Dry fit: Assemble all parts without glue to check alignment and fit.

- Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together.

- Optional fix: Use glue for permanent assembly.