Coat Caddy

This is a 4 piece wall mounted coat rack designed for small or awkward entryways. It can hold up to five hangers that are placed in their slot after the hanger is raised. Simply lift the caddy up and put the coathanger in the slot before returning to resting position. This was printed in PETG at 50% infill, no supports no brim, on .4 nozzle at standard .2 settings otherwise. All parts were printed together as shown in image but finer detailed results could come from printing fewer pieces at a time. The image shows the bend at approximately 20-25 lbs (heavy jackets). No indication of breaking or distorting. Infill could be increased if needed. Should accommodate most coat hangers, as I tried all available to me.