CNC Kitchen deburring tool multiboard holder
Remix of the deburring tool holder by @PaulFirschin_1114995 to fit multiboard push holes as a push fit.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a David M.
Archivos (3)
- cnckitchen-deburring-tool-multiboard.middle.stl STL · 29 KB
- cnckitchen-deburring-tool-multiboard.top.stl STL · 28 KB
- cnckitchen-deburring-tool-multiboard.bottom.stl STL · 29 KB
- Categoría
- Para tu impresora
- Formatos
- STL
- Descargas
- 190
- Publicado
Sobre este modelo
Remix of the deburring tool holder by @PaulFirschin_1114995 to fit multiboard push holes as a push fit.
Printed in pla+, 0.2mm layer height, 3 walls, 20% infill. Supports highly recommended for the middle and top variant!
Made 3 variants: - one with the peg in the middle (as pictured) - one with the peg at the bottom - one with the peg at the top
Logo didn't really come out nicely so i cut it off with a hobby knife. You might have better results with the logo if you print at 0.12mm and/or a smaller nozzle (picture is printed with a 0.4mm nozzle).
If anyone wants a model without the logo, let me know and i'll upload it.
Remix of: https://www.printables.com/model/694746/remixes
Descripción original del autor, publicada en Thangs.
