CNC Clamp 2mm to 18mm
por Patrick Horvers en MyMiniFactory
Clamps for holding down your workpiece on a cnc router. The clamps are designed for holding down materials with a thickness of 2mm to 18 mm.
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Patrick Horvers.
Archivos (2)
- Clamp 5Mm Bolt.stl STL
- Clamp 6Mm Bolt.stl STL
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 431
- Publicado
Sobre este modelo
Clamps for holding down your workpiece on a cnc router. The clamps are designed for holding down materials with a thickness of 2mm to 18 mm. There are 2 different sizes for the bolt that goes through, M5 or M6. Best is to use a washer on top. The actual foot to hold your workpiece can rotate to adjust to the thickness of your material. This clamp can be used on a wastboard like this: https://www.youtube.com/watch?v=yhVW6Q9o-34 or on v-slots with an added drop in t-nut.
Parts to add: 1 bolt per clamp M5 or M6 also the lenght is depending on your wasteboard. 1 washer per clamp In case of v-slots 1 drop in t-nut per clamp
Descripción original del autor, publicada en MyMiniFactory.
