CMF Watch Pro 2 Bezel
por Daniil Danilov en Printables
3D printed bezels for the CMF Watch Pro 2 smartwatches
Licencia
Uso comercial permitidoPuedes imprimirlo, modificarlo y venderlo dando crédito al autor.
Al descargar aceptas respetar la licencia y dar crédito a Daniil Danilov.
Archivos (12)
- Bezel With Lock Fillet.step STEP · 38 KB
- Bezel With Lock chamfer.step STEP · 38 KB
- Bezel With Lock Chamfer Big.step STEP · 37 KB
- Bezel With Lock.step STEP · 37 KB
- Bezel With Lock Fillet.3mf 3MF · 102 KB
- Bezel With Lock flat.3mf 3MF · 50 KB
- Bezel With Lock chamfer big.3mf 3MF · 66 KB
- Bezel With Lock chamfer.3mf 3MF · 61 KB
- Bezel With Lock Fillet_0.1mm_PLA_MK3S_10m.gcode GCODE · 498 KB
- Bezel With Lock chamfer_0.1mm_PLA_MK3S_10m.gcode GCODE · 511 KB
- Bezel With Lock chamfer big_0.1mm_PLA_MK3S_13m.gcode GCODE · 691 KB
- Bezel With Lock flat_0.1mm_PLA_MK3S_10m.gcode GCODE · 529 KB
- Categoría
- Tecnología
- Formatos
- STEP, 3MF, GCODE
- Descargas
- 2,021
- Publicado
Sobre este modelo
Since I lost the original bezel on the first day, I have designed a 3D printable replacement with different bezel styles: - Flat. The bezel is a flat surface with a sharp edge on the outer diameter - Fillet. Has a fillet on the outer diameter - Chamfer. Has a chamfer on the outer diameter - Big chamfer. The bezel is 1mm above the screen with a chamfer on the outer diameter
The model has small pins for the locking mechanism, which has no supports, and depending on print quality some cleaning may be required. Based on my experience PLA works better than PETG. Also, the bezel can be too tight at the beginning, but after a few turns, it should be OK.
I didn't have an original bezel during the design process, so the model was made by trial and error method which means, that it is not perfect compared to the original CMF part (Hopefully they will release a 3D model of it)
Feel free to improve and modify it to your taste
Descripción original del autor, publicada en Printables.
