CLIPDOCK_DISPENSER.stl

CLIPDOCK - Bag Clips 10-Pack with Wall Dispenser Available as a PRINTED SET (shipped to you) or as DIGITAL STL / 3MF FILES

Keep chips, cereal, coffee and frozen bags sealed, and keep the clips in one spot instead of lost in a drawer. CLIPDOCK is a set of 10 bag clips plus a slim wall dispenser that holds the whole stack. Pull a clip from the bottom and the next one drops into place. Refill from the open top.

FEATURES - One-piece clips with nothing to assemble. A spring hinge pops them open and a snap latch locks them shut. - Grip teeth on the jaw hold bags tightly without slipping. - A thumb tab on the latch makes the clips easy to open. - The dispenser holds 10 clips and serves them from the bottom. - Mount the dispenser with nano tape (built-in pockets on the back) or two screws (countersunk holes).

SIZE - Clip: 108 x 21 x 12 mm (4.25 x 0.8 x 0.5 in) - Dispenser: 117 x 29 x 131 mm (4.6 x 1.1 x 5.2 in)

================================================== OPTION 1 - PRINTED SET (PHYSICAL ITEM) ================================================== WHAT YOU GET - 10 bag clips (printed in PETG for a long-lasting hinge and latch) - 1 wall dispenser - Colors: choose at checkout

WHAT YOU MIGHT NEED TO MOUNT IT - Nano tape / double-sided mounting tape, 2 strips about 90 x 25 mm OR - 2 x #8 (4 mm) flat-head countersunk wood screws, plus wall anchors for drywall - Optional: screwdriver or drill, and a level for straight mounting

Each set is made to order. Small layer lines are normal for 3D-printed items.

================================================== OPTION 2 - DIGITAL FILES (STL / 3MF) ================================================== INCLUDED - CLIPDOCK_CLIP.stl (single clip) - CLIPDOCK_CLIP_x10_PLATE.stl / .3mf (all 10 clips on one plate) - CLIPDOCK_DISPENSER.stl / .3mf

WHAT YOU'LL NEED - A 3D printer with a bed of at least 135 x 135 mm (Bambu A1, A1 mini, P1S, X1C, Prusa, Ender, etc.) - Filament: PETG recommended for the clips (PLA works too); any PLA for the dispenser - Mounting supplies listed above (nano tape or 2 screws)

PRINT SETTINGS - Layer height: 0.2 mm - Walls: 3 or more for the clips, 2-3 for the dispenser - Infill: 15-20% - Supports: none - Orientation: clips lie flat as provided; the dispenser stands upright as provided - All 10 clips fit on one 256 mm (Bambu A1) plate

No physical item is shipped with the digital option.

HOW TO USE 1. Snap each clip closed once or twice to break in the hinge. 2. Mount the dispenser on a wall, inside a pantry door, or on the side of a cabinet. 3. Drop the clips in from the top, then pull the bottom one out forward whenever you need it.

LICENSE (digital files): Personal use only. Do not resell or share the files.