cling film dispenser

Overview: This is a remixed 3D-printable cling film dispenser designed to make wrapping food fast, neat, and frustration-free. Key Feature: The design is adapted to reuse the plastic slide cutter strip from a standard store-bought cardboard roll. You can peel the sliding cutter off the original cardboard box or purchase a replacement slide cutter strip on AliExpress, and attach it to this printed body for a smooth, effortless cut every time. Compatibility: Perfectly sized for standard 330 mm wide cling film rolls. The design includes custom side inserts. For larger rolls like Kirkland, which feature a smaller inner core diameter, you can easily remix the included side inserts to fit your specific needs. Design Benefits:Replaces flimsy cardboard packaging with a sturdy, reusable housing. Prevents the wrap from tangling or sticking to itself.Clean, straight cuts using the slide cutter mechanism. Print SettingsMaterial: PETG (used for the main body for extra durability). Nozzle Size: Printed with a 0.6 mm nozzle for speed and strength, but a standard 0.4 mm nozzle works perfectly as well.Layer Height: 0.3 mm for 0.6 mm nozzle (or 0.2 mm if using a 0.4 mm nozzle).Infill: 15%–20% (Grid or Gyroid). Supports: Not required if oriented correctly on the print bed. Orientation:Print the main body vertically/flat as shown in the slicer to ensure optimal strength. Assembly Instructions:Print all necessary parts, including the main body halves and the side inserts (note: if you are using Kirkland rolls with a smaller inner diameter, you will need to remix the provided side inserts to fit). Glue the two large body parts together. Tip: For assembling the plastic parts securely, I recommend using a specialized transparent hard plastic adhesive (cold-welding type).Prepare your plastic slide cutter with the sliding blade (either peel it from a store-bought cling film box or use a spare one bought from AliExpress). Clean the mounting surface on the 3D-printed dispenser and attach the slide cutter (you can use its original adhesive backing or add a tiny drop of super glue if needed).Insert your cling film roll along with the side adapters, thread the edge through, and enjoy your new kitchen gadget! remix from: https://makerworld.com/en/models/1906668-kirkland-231m-cling-film-perfect-replacement-dispe#profileId-2044094