Citrus juicer “Boaty”
por Gazzaladra en Thangs
A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesStandardDigitalFileLicense
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Gazzaladra.
Archivos (1)
- boaty.stl STL · 1,8 MB
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 405
- Publicado
Sobre este modelo
A boaty-looking citrus juicer with two spouts. One with a separator for seeds and pulp and one without. The spouts serve as a handle during the pressing process. Great for Oranges, Lemons, and Limes.
Size: 130 x 164 x 64mm This is the V3
Print settings Only use certified food save material to print this product. Foodsafe and dishwasher safe PLA is the optimal material for this design.
Required build volume: 130 x 164 x 64mm Material usage: 60g Print time: 6h
Material: Food safe filament Print direction: stls are rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm – 0.28mm Outer walls: 3 Infill: 20% Build plate adhesion type: none
Watertight printing - If you have a well set up machine it comes automatically - Otherwise here are some tips: Increase your wall count (at least 3), level your bed nicely, decrease print speed, increase layer height (at least 0.2mm), check your seam quality, calibrate your e-steps and fine tune your retraction settings to make sure no holes appear after a layer change.
Descripción original del autor, publicada en Thangs.
