Chubby Capybara Planter – Kawaii Mom & Baby Succulent Pots with Yuzu Hats and Hot Spring Drip Trays

A chill, chubby capybara lying with its chin on its paws – and a planter in its back! This original kawaii set comes as a mom and a baby, each with a removable yuzu "hat" and its own little hot spring drip tray. Everything prints without supports.

WHAT YOU GET

- Capy_Planter – the big capybara planter (opening 84 x 58 mm, 5 drain holes, 2.6 mm walls)

- Capy_Baby_Planter – the baby (opening 47 x 33 mm, 2 drain holes) for a tiny succulent or air plant

- Yuzu_Hat + Yuzu_Hat_Mini – dimpled citrus hats with stem and leaf; they slide over a peg on the head (0.30 mm clearance per side, flat seat)

- Hot_Spring_Tray + Hot_Spring_Tray_Mini – drip trays with 45° "pebble" feet, so water drains away under the planter

- README.txt with print settings, two-colour yuzu (filament change height) and painting tips

- 6 parts in total (3MF for the organic parts, STL for the trays)

SIZE

- Big planter 201 x 106 x 89 mm (with yuzu ~105 mm tall); big tray 200 x 113 x 14 mm

- Baby planter 113 x 59 x 50 mm; mini tray 116 x 67 x 10 mm

- Fits a 220 x 220 mm bed

- Big pot takes a succulent, small cactus or a 6 cm (2.5") nursery pot

PRINTING

- No supports: every outside surface is 45° or steeper and the inside of the planter widens downwards at max 45°, so there are no bridges

- 0.2 mm layers, 3 walls, 10–15 % infill; PLA or PETG (PETG recommended for planting directly in soil)

- Approx. filament at 15 % infill: big planter ~215 g, baby ~55 g, trays ~85 g, hats ~7 g

- Optional: filament change at Z = 23.2 mm (Yuzu_Hat) / 14.2 mm (mini) for a green stem and leaf

- The eyes are smooth raised domes – dab them with black paint or a paint marker like in the renders

- Checked digitally (watertight single bodies, overhangs, assembly fit); plants and soil in the renders are props

Generated with the DIATEH GEN parametric engine.