Christmas Photo Ornament with Bow | No Glue

Turn your favorite photo into a Christmas keepsake! This round photo ornament features an integrated decorative bow and a removable snap-fit back cover, keeping your picture in place without glue. Add a family portrait, a photo of your children, a couple’s picture, or a favorite pet, and hang it on your Christmas tree with a ribbon or string. Model features

- Four snap-fit clips secure the back cover while allowing the photo to be replaced.

- Built-in alignment guide helps position the cover correctly.

- Integrated bow and hanging hole complete the design.

- No AMS required — print the frame and cover separately in your preferred colors.

Photo Size For the 85 mm ornament, cut your photo into a circle approximately 75 mm in diameter.

Printing and Assembly Print the frame and back cover separately, keeping the supplied orientations: the frame’s decorative front faces the build plate, and the cover’s photo-facing side faces the build plate.

Place the cut photo in the recess behind the frame. Align the cover’s guide with the slot beneath the bow, then gently press near each of the four clips until they engage. Thread a ribbon or string through the hanging hole to finish. To change the photo, gently release the clips through the side openings and remove the cover. Avoid pulling the cover off while the clips are still engaged.

Print the both parts

Put the photo

Fit the lid in place (no need to use glue). Boost MeBoost me for free