Christmas Ornament Candy Dish

I was asked to design a Christmas ornament candy dish. This is what I came up with. It came out way better than I ever thought it would have. It prints very well even without supports! I am even filling them with candy canes and other candies to give out as gifts and people love them. Print Settings: - ORNAMENT - .8mm nozzle at .4mm layer height (this works great with .4mm nozzle and .2mm layer height but takes MUCH longer) - CROWN, CLIP and HOOK - .4mm nozzle at .2mm layer height - 15% Infill - Prints great with PLA and PETG - No supports needed

Assemble: - Put the crown on first - Squeeze the clip together and put it through the holes of the crown. - Then snap the small part of the hook onto the clip thats in the crown.

Tips: - Here is a link to a video on how to put the clip in the crown.

- If the clip breaks, then print it last and take it right off the print bed as soon as it finishes and squeeze it or you can use a heat gun.

Thank you to @Dadof6 for this video showing them being printed: https://www.instagram.com/p/CXKngN9FMS8/