Case for Raspberry Pi 3b+ and SenseHat
por Carter en Printables
Case for Raspberry Pi and Sense-Hat board SenseHat NOT required! Breakaway Supports included.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Carter.
Archivos (10)
- top-slots.stl STL · 3,9 MB
- sensehat-case-toggle2.stl STL · 274 KB
- bottom.stl STL · 1,5 MB
- top.stl STL · 3,5 MB
- top-camera.stl STL · 3,6 MB
- opi3mk3_bottom.gcode GCODE · 1,3 MB
- opi3mk3_sensehat-case-toggle2.gcode GCODE · 498 KB
- top-slots.gcode GCODE · 7,3 MB
- opi3mk3_top.gcode GCODE · 7,0 MB
- top-camera.gcode GCODE · 7,1 MB
- Categoría
- Tecnología
- Formatos
- STL, GCODE
- Descargas
- 2,365
- Publicado
Sobre este modelo
Case for Raspberry Pi and Sense-Hat board
SenseHat NOT required!
Breakaway Supports included.
New .35mm smaller Z, led window, pop-outs for joystick and GPIO, camera slot and insert cover, io ports edited.
Snaps together Bracket for Case and Prusa I3 MK3 available.
need M2.5 screws to attach board to bottom case and Pi.
One place to Get a Sense Hat...
https://www.adafruit.com/product/2738
Print instructions The case snaps together, breakaway inserts support openings... no other supports needed.
use a brim to hold down corners... when built with ABS
Descripción original del autor, publicada en Printables.
