C-Clamp with Swappable Clamp-Ends
por Studio Space Dust en Printables
C-Clamp with swappable Clamp-Ends for customised experience.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Studio Space Dust.
Archivos (28)
- Clamp T-0_1mm.stl STL · 2,7 MB
- Clamp T-0_2mm.stl STL · 877 KB
- Gen. 02_Clamp Pin (Clip-On) + Bigger Handle.stl STL · 2,1 MB
- Gen. 02 Bottom End V3 T-0_1m (Clip-On).stl STL · 157 KB
- Gen. 02 Bottom End V4 T-0_1m (Clip-On).stl STL · 342 KB
- Gen. 02 Bottom End V2 T-0_1m (Clip-On).stl STL · 168 KB
- Gen. 02 Bottom End V1 T-0_1m (Clip-On).stl STL · 167 KB
- Bottom End V5 T-0_1m (Clip-On) 65mm wide.stl STL · 165 KB
- Bottom End V6 T-0_1m (Clip-On) 65mm wide corner.stl STL · 216 KB
- Gen. 02 Top V1 and Bottom V1 T- 0_1 (For your own designs) (Clip-On).3mf 3MF · 30 KB
- Top End V3 T-0_1m.stl STL · 7 KB
- Top End V4 T-0_1m.stl STL · 159 KB
- Top End V2 T-0_1m.stl STL · 9 KB
- Gen. 01 Top End V1 T-0_1m.stl STL · 5 KB
- Gen. 02 Top End V1 T-0_1m.stl STL · 5 KB
- Top End V5 T-0_1m (Clip-On) 65mm wide.stl STL · 11 KB
- Top End V6 T-0_1m (Clip-On) 65mm wide corner.stl STL · 48 KB
- Tightening Tool for Gen. 01_Clamp Pin T-0_1mm.stl STL · 410 KB
- Tightening Tool for Gen. 01_Clamp Pin T-0_2mm.stl STL · 478 KB
- Tightening Tool for Gen. 02_Clamp Pin T-0_1mm.stl STL · 493 KB
- Tightening Tool for Gen. 02_Clamp Pin T-0_2mm.stl STL · 487 KB
- Gen. 01_Clamp Pin (Non Clip).stl STL · 3,1 MB
- Gen. 01 Bottom End V3 T-0_1m (Non Clip).stl STL · 81 KB
- Gen. 01 Bottom End V4 T-0_1m (Non Clip).stl STL · 265 KB
- Gen. 01 Bottom End V2 T-0_1m (Non Clip).stl STL · 80 KB
- Gen. 01 Bottom End V1 T-0_1m (Non Clip).stl STL · 76 KB
- Gen. 01 Top V1 and Bottom V1 T- 0_1 (For your own designs) (Non Clip).3mf 3MF · 9 KB
- Tripple Pin.stl STL · 12,6 MB
- Categoría
- Herramientas
- Formatos
- STL, 3MF
- Descargas
- 8,901
- Publicado
Sobre este modelo
Print Settings: - 0.4 Nozzle
- 0.2mm Layer Height
- 40% -60% Infill of choice
- 5 Perimeters
- Printed fine without any supports on MK4. I used Prusament filaments.
Materials and Tolerances: - PLA with T-0.1mm pretty much screwed in without any post processing while
- PETG-CF needed light sanding. That's why I'm attaching 2 options for download with 0.1mm and 0.2mm tolerance between clamp and the pin thread. I would say - if you have some sanding paper and small round file (2mm) to clean between threads go for 0.1mm model and make it as tight as you want. Otherwise 0.2mm option might be easier and require no post processing (Tested).
- PC I test printed one Clamp Frame sideways, - it works as in the photo of description.
Tips: - To Mount Bottom-Ends I suggest rotating handle clockwise all the way till Pin pushes itself in.
- To Dismount I suggest to rotating handle counter clockwise all the way till Pin unclips itself.
Descripción original del autor, publicada en Printables.
