Build Plate Cleaner – Auto-Grip Cloth Clamp 1-5mm

Keep your 3D printer build plate clean with a compact, reusable cleaning tool featuring a print-in-place design and an auto-grip cloth clamp. The integrated clamp securely holds cloths from 1–5 mm thick, without screws, knobs, or manual adjustments. Simply open, insert the cloth, and close the clamp. Changing or removing the cloth is just as easy. Boost MeKey Features

- Print-in-Place – One-piece design, ready to use after printing.

- No Supports, No Assembly – No screws, glue, or additional hardware required.

- Auto-Grip Cloth Clamp – Securely holds cloths from 1–5 mm thick without adjustments.

- Quick Cloth Replacement – Easily insert, remove, or replace the cleaning cloth.

- Reusable & Practical – Works with suitable microfiber and other lint-free cleaning cloths.

- Compact Design – Comfortable to handle, with an optional hanging loop for convenient storage.

Available Sizes & Cloth Dimensions Three cleaning surface sizes are available: SizeCleaning SurfaceRecommended Cloth Size Small (S)40×40 mm40×88 mm Medium (M)50×50 mm50×110 mm Large (L)60×60 mm60×132 mm

Cut the cloth to approximately 2.2 times the cleaning surface length, allowing enough material to wrap around and secure it inside the clamp. Cloth dimensions are approximate and may be adjusted depending on fabric thickness and flexibility.

How to Use

- Open the integrated cloth clamp.

- Insert a suitable cleaning cloth.

- Close the clamp to secure the cloth automatically.

- Wipe your cooled build plate using an appropriate cleaning method.

- Open the clamp whenever you need to replace or wash the cloth.

Printing Notes

- Print-in-place design

- No supports required

- No assembly required

- No additional hardware needed

After printing, gently free the moving parts before the first use. Note: Always use a clean cloth and follow your build plate manufacturer's cleaning recommendations. Allow the build plate to cool before cleaning. Print it, clip the cloth, and keep your build plate clean!