Bookshelf Alignment Tool - 7 sizes, 5–20mm
por n2history en Printables
Bookshelf tool that keeps books flush at a set depth, with sizes from 5mm to 20mm. No supports, no assembly.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a n2history.
Archivos (7)
- Categoría
- Hogar
- Formatos
- STL
- Descargas
- 1
- Publicado
Sobre este modelo
In a rush? Hate reading instructions and want to get down to it? Load the model of choice. All models are properly oriented for printing when loaded into the slicer (standing on end) and ready to print. PLA works great--I printed 0.20 mm layers on my 0.4 mm nozzle. No brim, no support. Enjoy! Getting started Keep your books aligned nicely at the front of the bookshelf. This tool makes it easy to position your books at a consistent depth on the shelf so spines sit flush and your inner OCD is satisfied. To use, pull your books to the front of the shelf and then nudge them back the desired distance with the matching alignment tool. Comes in 7 depths: 5, 7.5, 10, 12.5, 15, 17.5, and 20mm. Each size is labeled on the front face with its depth in mm and a small book icon, so they're easy to tell apart. Print settings Bookshelf Alignment Tool STL files are ready for your slicer. Print recommendations: - Layer height: 0.2 mm
- Infill: 10% to 15%
- Orientation: As loaded, standing tall on end
- Supports: No
- Brims: No
- Filament: Any standard filament works (PETG or PLA)
Descripción original del autor, publicada en Printables.
