BLOOM BOWL - Flower Pet Bowls • Magnetic • Blank for Personalization

A little bloom for their daily routine.

BLOOM BOWL pairs six plump flower petals with removable stainless steel inserts. The butter-yellow and powder-pink gallery examples show a soft, playful feeding station that can also be printed in your own colors. Rounded shoulders, a smooth front petal and concealed magnetic connections keep the design simple.

Two independent holders join at their flat inner faces or work separately. Each holder has four recessed adhesive feet. The front petals are supplied BLANK for your own personalization.

WHAT YOU DOWNLOAD ONE editable Bambu Studio 3MF project with THREE plates: 1. Fit-first plate: bowl-fit ring, foot coupon, two magnet test sockets and two test caps. 2. Left blank flower body and its magnet-retaining cap. 3. Right blank flower body and its magnet-retaining cap. Four production parts total: two bodies and two caps. Test pieces are additional. This is a DIGITAL DOWNLOAD. It is not a finished physical product; steel bowls, magnets, adhesive feet and adhesive are purchased separately.

PERSONALIZATION Both front petals are blank in the supplied 3MF. MILO and LUNA shown in two gallery images are customization examples, not included text. Add your own embossed or engraved lettering with suitable modeling tools, ensure it follows and joins the curved front surface, and re-slice. The file is not an automatic name generator. A blank body prints in a single color without AMS. Contrasting lettering requires a separate multicolor or painting workflow.

APPROXIMATE DIMENSIONS One printed holder: 8.41 × 9.53 × 3.07 inches (213.72 × 242.00 × 78.00 mm). Joined pair: about 16.83 inches (427.44 mm) wide. These dimensions describe printed housings; adhesive feet and the steel lip add height. Insert aperture: 6.52 inches (165.5 mm), provisional until tested with your actual insert. PRINT THE FIT RING FIRST: the insert's outside diameter immediately below its rim is not manufacturer-specified, so the body fit has not yet been physically confirmed.

PRINT SETTINGS Included profile: Bambu Lab X2D, 0.4 mm nozzle, PLA, 0.16 mm layers. Bodies: 3 walls, 5 top/4 bottom layers, 10% gyroid infill, 40 mm/s outer walls. TREE/organic supports are enabled for the bodies. Retaining caps and fit pieces print without supports; caps and magnet test sockets use 100% infill. Use the flat-bottom orientation already provided. Select your actual printer and filament, inspect the preview and re-slice before printing. The 3MF is an editable project, not printer-ready G-code.

SLICER ESTIMATES — BLANK MODEL Left body/cap plate: about 14h 17m / 342 g. Right body/cap plate: about 14h 17m / 342 g. Fit-test plate: about 3h 38m / 60 g. All three plates: approximately 32h 12m / 743 g, including supports. These are slicer estimates, not measured print results. Personalization and different settings change them.

HARDWARE FOR ONE COMPLETE PAIR 2 × Yahenda stainless steel bowls — select the 6.9-inch variant: https://www.amazon.com/dp/B0BM4652DV The linked set contains six bowls; two are used here. Seller dimensions: lip outside diameter 175 mm (6.89 in), inside mouth 155 mm (6.10 in), base 120 mm (4.72 in), height 58 mm (2.28 in). Do not select 8.3-inch or 11-inch variants. The outside diameter immediately below the lip is unpublished. The model's 165.5 mm (6.52 in) aperture MUST be checked against your actual bowl using Plate 1 before printing the bodies.

8 × self-adhesive silicone feet — four per body: https://www.amazon.com/dp/B08BR6CGWL Selected variant: 160-pack, 0.50-inch diameter × 0.14-inch height (12.7 × 3.556 mm). Pockets: diameter 13.2 mm × 1.2 mm deep. Nominal protrusion: 2.36 mm.

4 × neodymium disc magnets, 10 mm diameter × 2 mm thick — two per body. Magnet brand/grade is unspecified. Holding force has not been physically measured.

PLA filament plus PLA-compatible adhesive to permanently bond the two printed magnet-retaining caps. Follow the adhesive manufacturer's preparation and full-cure instructions. Purchased hardware is not included in this digital download.

ASSEMBLY Print and test the supplied ring, foot coupon and paired magnet test sockets/caps with your real hardware first. Do not globally scale the model to change one fit; that changes every hardware pocket.

Match each magnet pair so opposite modules attract. Slide the magnets into their pockets from the underside channels. Dry-fit the printed retaining caps, then permanently bond them with a suitable PLA-compatible adhesive. Let the adhesive fully cure and verify the caps cannot release the magnets before allowing pet access. The caps must not be held by friction alone.

Attach four adhesive feet under each holder and insert the steel bowls from above. Check stability with filled bowls and test the connection on your floor. Magnets align the holders; they are not a carry lock. Lift each filled module separately.

CARE Food and water go only in the stainless inserts. Wipe the PLA holders with a damp cloth and dry them. Do not put the printed holders in a dishwasher, microwave or hot water. Stop use if a cap cracks or loosens: loose magnets must remain inaccessible to pets and children. ca