Birdhouse 002 - Mid-Century Modern Birdhouse & Succulent Planter
As my next installment of birdhouse, I thought I'd go with a modern mid-century look and incorporate planters into it!
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesModel License 10-2025
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a Eric P.
Archivos (15)
- Birdhouse 002_Anycubic.3mf 3MF · 1,2 MB
- Birdhouse 002_Bambu.3mf 3MF · 1,1 MB
- Birdhouse 002_PrusaXL.3mf 3MF · 859 KB
- Floor.stl STL · 433 KB
- Front Ring.stl STL · 545 KB
- House.stl STL · 1,7 MB
- Peg.stl STL · 480 KB
- Planter.stl STL · 223 KB
- Posts.stl STL · 25 KB
- Roof.stl STL · 4,7 MB
- Roof_Planter.stl STL · 2,9 MB
- Slats.stl STL · 53 KB
- Stone Wall.stl STL · 4,0 MB
- Wood Wall.stl STL · 40 KB
- Modern Birdhouse Assembly Guide.pdf PDF
- Categoría
- Jardín
- Formatos
- 3MF, STL, PDF
- Descargas
- 139
- Publicado
Sobre este modelo
As my next installment of birdhouse, I thought I'd go with a modern mid-century look and incorporate planters into it!
So here it is! Print it! It's neat!
Printing Instructions: Included are two versions of the roof. One without a planter and one without. The option with the planter does require supports.
When placing this outside I recommend using materials such as PETG, ASA/ABS, or Polymaker's HT-PLA.
Feel free to scale up if you feel it needs to be bigger. The clearances should be just fine.
While the 3mf files provided indicate that you need a multi-color system to print the rock wall, it will still look fantastic in a single color. - Layer height: 0.2mm - Supports: The optional roof that incorporates a planter on top does require supports - Wall loops: Recommended 4-5 wall loops when printing with lighter color filaments. Everything else will do fine with 2-3 wall loops
Assembly: Please refer to the provided assembly guide for instructions
Filaments I used: - Polymaker Matte Black PLA - Push Plastic Desert Tan PLA - Bambu Lab White PLA Basic - Bambu Lab Ash Gray Matte PLA - Bambu Lab Nardo Gray Matte PLA - Bambu Lab Dark Chocolate Matte PLA - Bambu Lab Cocoa Brown PLA Basic
Feel free to join my discord (https://discord.gg/tdxE35eZwF) for additional support, questions, or suggestions!
Descripción original del autor, publicada en Thangs.
