Bench Vise Phone Stand - a mini bench vise that holds your phone (100% printed)
por DELLOO2008 en Printables
Mini bench vise with a real T-handle spindle that clamps your phone on your desk, upright or sideways.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a DELLOO2008.
- Categoría
- Tecnología
- Formatos
- 3MF, STEP
- Descargas
- 16
- Publicado
Sobre este modelo
Put your phone between the jaws and turn the T-handle until it is held tight. The jaws grip the sides of the phone, so the screen and the charging port stay free. Loosen the big knob at the back to turn the whole vise head: the 24-tooth Hirth joint clicks in 15 degree steps, so it is always straight in portrait or landscape and can't slip. - Fits phones from 63 to 94 mm wide and up to 14 mm thick, also with a case
- Screw-clamped, so the phone does not wobble when you tap the screen
- Clamp the phone a bit higher or lower so the jaws miss the side buttons
- Head turns in 15 degree steps for portrait and landscape
- Tilted back 15 degrees for easy viewing
- Recesses for stick-on rubber feet (optional)
- Fully printed: spindle, joint bolt and nuts are printed, no metal hardware needed
Not tested yet - designed and checked in CAD (all threads and parts checked for fit and clearance, with a phone in portrait and landscape).
Descripción original del autor, publicada en Printables.
