Battery Holder with optional Gridfinity base
por Dead.Pixel en Thangs
Simple holder with compartments for AA and AAA batteries. It requires a minimum amount of plastic to print.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Dead.Pixel.
Archivos (6)
- Battery Holder_4slots_Gridfinity.stl STL · 159 KB
- BatteryHolder_2Slots.stl STL · 128 KB
- BatteryHolder_2Slots_Gridfinity.stl STL · 105 KB
- BatteryHolder_4slots.stl STL · 197 KB
- Divider_AA.stl STL · 32 KB
- Divider_AAA.stl STL · 28 KB
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 1,444
- Publicado
Sobre este modelo
Simple holder with compartments for AA and AAA batteries. It requires a minimum amount of plastic to print. I don't like the idea of having different organizers for these two types of battery so I created this design to keep them all in one place. You can also print dividers to separate discharged batteries and keep them in the same place.
---
Versions - Smaller (42x84x25mm) - Smaller with Gridfinity base (2x1 slots) - Bigger (42x168x25mm) - Bigger with Gridfinity base (4x1 slots)
Gridfinity versions are identical to normal but have a solid bottom with grid slots.
---
Printing - 2 wall perimeters - outer/inner wall printing order - doesn't require infill - 3 bottom shell layer
---
**This model is free for personal, non-commercial purposes only. If you like my works and find them useful you can support me by buying me a coffee here buymeacoffee.com/dead.pixel (https://buymeacoffee.com/dead.pixel) or here ko-fi.com/dead_pixel (https://ko-fi.com/dead_pixel). Thank you!**
Descripción original del autor, publicada en Thangs.
