BambuLab-A1-BloodChainIchigo.3mf
por BraineyBites en Thangs
A stylized Ichigo figure, sculpted from scratch in Blender and test printed before release.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a BraineyBites.
Archivos (2)
- BambuLab-A1-BloodChainIchigo.3mf 3MF · 63,5 MB
- BraineyArchives_RenderAndPrint_NoText_0007_Full_Photo_raw_01_Front_04_Warm.png PNG
- Categoría
- Cosplay y props
- Formatos
- 3MF, PNG
- Descargas
- 2
- Publicado
Sobre este modelo
A stylized Ichigo figure, sculpted from scratch in Blender and test printed before release.
Watch Video: How the Model was Created: https://youtu.be/NW3YCwqdeNo 3D Print & Paint: https://youtu.be/ze9i-B6tT_4
Specs - Parts: 3 (figure, base, accessory) - Formats: STL + 3MF
Tested print profile - Layer height: 0.2 mm (first layer 0.2 mm) - Nozzle: 0.4 mm - Wall loops: 4 · Sparse infill: grid - Speeds: first layer 50 mm/s · outer wall 150 mm/s · inner wall 200 mm/s · travel 400 mm/s - Acceleration: 10000 mm/s (first layer 500 mm/s) - Supports: tree (auto), slim, threshold 12 - Flow ratio: 0.95
What's included - STL files (per part) - 3MF with the tested profile - Pre-supported plate
Note before printing - One part is not fully watertight (8 boundary edges, 6 non-manifold edges on the main body). Run a mesh repair pass in your slicer or in Blender's 3D Print Toolbox before slicing.
Personal fan-art study. Bleach and its characters belong to Tite Kubo / Shueisha. Not for commercial resale. One Important Info: When i printed my version based on these settings, the moons 3d printing failed. So i had to Re-print it. You can see the youtube video, i have showcase my print timelapse there.
Descripción original del autor, publicada en Thangs.
