Bag Clip / Sealing Clips - Easy to print - without overhang & support
por Rean en MyMiniFactory
This is a universal sealing clip for every kind of bag. It's designed to be very easy to print.
Licencia
Solo uso personalCC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual
Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a Rean.
Archivos (4)
- Categoría
- Herramientas
- Formatos
- STL
- Descargas
- 267
- Publicado
Sobre este modelo
This is a universal sealing clip for every kind of bag. It's designed to be very easy to print.
There are no overhangs in the hinge design and all angles are 45°. There is no need for support as well. I recommend a layer height of 0.24mm and at least 3 outer walls. Infill is not needed. There are two teeth with sharp points for a water tight sealing. The hinge must be gently break free. The more the hinge is used, the less resistance it gets.
The sizes are named by their actual usable length. If you can't find the size you like, just write it in the comments.
50mm ≈ 2in 100mm ≈ 4in 150mm ≈ 6in
If you have a special wish like a longer version or an engraved name, you can contact me at [email protected] as well.
Descripción original del autor, publicada en MyMiniFactory.
