ATX basic open pc case / test bench
-The minimum required for the ATX tray are models Core and IO to hold the motherboard and pci cards (6 motherboard screws, or with the extensions, 9 motherboard screws).
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a Printkaas.
Archivos (9)
- ATX-v1.1-all-parts.stl STL · 1,1 MB
- ATX-v1.1-core.stl STL · 338 KB
- ATX-v1.1-core-extension.stl STL · 144 KB
- ATX-v1.1-io.stl STL · 135 KB
- ATX-v1.1-io-extension.stl STL · 86 KB
- ATX-v1.1-psu.stl STL · 203 KB
- ATX-v1.1-psu-extension.stl STL · 83 KB
- ATX-v1.1-stand-part1.stl STL · 88 KB
- ATX-v1.1-stand-part2.stl STL · 85 KB
- Categoría
- Tecnología
- Formatos
- STL
- Descargas
- 39
- Publicado
Sobre este modelo
-The minimum required for the ATX tray are models Core and IO to hold the motherboard and pci cards (6 motherboard screws, or with the extensions, 9 motherboard screws). -8 total models snap-fitted and then secured with a total of 25 size M3x12mm( or similar) nuts and bolts (phillips head recommended). -Optional stand for using the tray in upright position.
The motherboard and pci cards can be directly screwed onto the tray stands/holes with generic motherboard screws.
The best print-result for me was to print without changing orientation and using a 0.4mm nozzle for the snap-fitting connections. The taller models have 1mm horizontal support beams to be used with tree supports and are to be cut away. -Models are max 18.2cm in length
I suggest cutting out one of the pci-slot beams if its in the way of inserting a thick hmdi plug.
_03-30-2026 - v1.2 reverted small added spacing to now true dimensions. 02-27-2026 - added 3 extra screwholes on the extensions to actually make the model ATX. 02-26-2026 - v1.1 updated the models, added an optional stand. 02-25-2026 - corrected io-shield height and added extra holes for nuts/bolts to the extension parts._
Descripción original del autor, publicada en Thangs.
