Articulated Cute T-Rex
por 3DPrintyi en MakerWorld
New redesigned model with a rotating head: https://makerworld.com/de/models/3447783-articulated-cute-t-rex-redesigned
MakerWorld entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalStandard Digital File License
Licencia estándar de archivos digitales: solo uso personal. No se permite compartir, revender ni subir el archivo a otros sitios, ni vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a 3DPrintyi.
Archivos (39)
- Black_Eye_Left_2.stl STL · 1,6 MB
- Black_Eye_Right_2.stl STL · 1,6 MB
- DarkBrown_Arm_Left.stl STL · 2,0 MB
- DarkBrown_Arm_Right.stl STL · 2,0 MB
- DarkBrown_Body.stl STL · 17,8 MB
- DarkBrown_Connector_Head.stl STL · 16 KB
- DarkBrown_Head_Top.stl STL · 6,0 MB
- LightBrown_Belly.stl STL · 1,9 MB
- LightBrown_Head_Bottom.stl STL · 4,1 MB
- LightBrown_Spike_1.stl STL · 1,2 MB
- LightBrown_Spike_2.stl STL · 1,2 MB
- LightBrown_Spike_3.stl STL · 1,3 MB
- LightBrown_Spike_4.stl STL · 1,4 MB
- White_Arm_Left_Nail_Left.stl STL · 678 KB
- White_Arm_Left_Nail_Right.stl STL · 592 KB
- White_Arm_Right_Nail_Left.stl STL · 617 KB
- White_Arm_Right_Nail_Right.stl STL · 632 KB
- White_Eye_Left_1.stl STL · 749 KB
- White_Eye_Left_3.stl STL · 858 KB
- White_Eye_Right_1.stl STL · 749 KB
- White_Eye_Right_3.stl STL · 858 KB
- White_Head_Bottom_Teeth_Left.stl STL · 1,2 MB
- White_Head_Bottom_Teeth_Right.stl STL · 1,2 MB
- White_Head_Top_Teeth_Left.stl STL · 1,4 MB
- White_Head_Top_Teeth_Right.stl STL · 1,4 MB
- White_Leg_Left_Nail_1.stl STL · 604 KB
- White_Leg_Left_Nail_2.stl STL · 557 KB
- White_Leg_Left_Nail_3.stl STL · 463 KB
- White_Leg_Right_Nail_1.stl STL · 604 KB
- White_Leg_Right_Nail_2.stl STL · 528 KB
- White_Leg_Right_Nail_3.stl STL · 561 KB
- Arm_Left.stl STL · 1,8 MB
- Arm_Right.stl STL · 1,8 MB
- Body.stl STL · 17,5 MB
- Connector_Head.stl STL · 16 KB
- Head_Bottom.stl STL · 3,2 MB
- Head_Top.stl STL · 5,3 MB
- ArticulatedCuteT-Rex_Multicolor4ColorPrusaSlicerXL.3mf 3MF · 15,5 MB
- ArticulatedCuteT-Rex_MultipartPrusaSlicerXL.3mf 3MF · 16,9 MB
- Categoría
- Miniaturas
- Formatos
- STL, 3MF
- Descargas
- 9,686
- Publicado
Sobre este modelo
New redesigned model with a rotating head: https://makerworld.com/de/models/3447783-articulated-cute-t-rex-redesigned
ℹ Tips for printing Multicolor:
- Filament: PLA
- Supports: No!
- Layer height: looks best in 0.16(0.15)mm / 0,2mm also works
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: No!
- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
- Info‼: You can scale the T-Rex bigger but not any smaller otherwise the Connectors will no longer work!
ℹ Tips for printing Multipart:
- Filament: PLA
- Supports: No!
- Layer height: White and Black Parts in 0.12(0.10)mm / DarkBrown and LightBrown in 0,16(0.15)mm
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: No!
- BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion! + with a Smooth Plate you will see the numbers and letters better than on a Textured Plate!
- Info‼: Please do not scale the T-rex down, as the numbers would no longer be readable and could not be properly attached to the designated positions.
- Info‼: You can scale the model bigger
In both cases (multipart and multicolor), a connector must be glued in place to hold the head securely on the body. Please wait until the adhesive has fully cured. The head Top and Bottom needs to be clipped on!
In the multipart version, each position is marked with a number or letter to make it easier to identify and glue the parts correctly. Please make sure that the numbers and letters match exactly.
------------------------------------------------------ ❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use. ------------------------------------------------------
Colors and filament I used (4 Color):
Descripción original del autor, publicada en MakerWorld.
