Art Deco Jewelry Organizer Dish with Ring Cone
por shellylee3d en Thangs
A vanity-top catch-all that gives each kind of jewelry its own place. The blush pink tray has three zones:
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalSin licencia indicada
El autor no indicó una licencia: todos los derechos le pertenecen. Úsalo solo para imprimir en casa y consulta al autor para cualquier otro uso.
Al descargar aceptas respetar la licencia y dar crédito a shellylee3d.
Archivos (4)
- body.stl STL · 365 KB
- accent.stl STL · 344 KB
- assembled.stl STL · 590 KB
- ring_dish.3mf 3MF · 1,3 MB
- Categoría
- Moda y joyería
- Formatos
- STL, 3MF
- Descargas
- 1
- Publicado
Sobre este modelo
A vanity-top catch-all that gives each kind of jewelry its own place. The blush pink tray has three zones: - Necklace / bracelet compartment: a deep pocket with a flush champagne-gold Art Deco diamond lattice inlaid in the floor. The lattice is printed in, not painted. - Ring well: a tapered champagne-gold ring cone stands in the middle of its own well. It goes from Ø22 mm down to Ø10 mm, so it holds rings from about US size 3 to 14+, stacked. Loose rings can drop into the well around it. - Earring deck: 14 countersunk stud holes in two columns (7 pairs), separated by a row of gold inlaid diamonds.
The ring cone is a separate part with a peg that slips into a boss in the well, so you can lift it out to put rings on or clean it. The underside has 4 shallow recesses for Ø10 mm self-adhesive bumper feet (optional). The design is plain, with no text or logos.
Dimensions (measured from the model, mm): - Overall: 160.0 x 100.0 x 62.0 with the cone (about 6.3 x 3.9 x 2.4 in); the tray alone is 20.0 tall - Necklace / bracelet compartment: 66.0 x 95.2 x 17.0 deep (about 106 ml) - Ring well: 54.0 x 95.2 x 17.0 deep (about 87 ml); 16 mm of clearance between the cone base and the well walls - Ring cone: Ø22.0 base to Ø10.0 top, 56.0 tall above the boss (42 mm above the rim) - Earring deck: 35.2 wide, 14 holes Ø1.6 x 10.0 deep (Ø2.7 countersink), 12.0 row pitch, 14.0 between the holes of a pair - Walls 2.4, floor 3.0, divider 2.4, corner radius 14.0 - Cone peg Ø8.0 fits a Ø8.3 hole (0.15 clearance per side), 4.8 deep, in a Ø25.9 x 3.0 boss - Inlays are 0.6 deep and flush; lattice lines 1.4 wide on a 14.0 pitch - Bumper recesses: 4 x Ø10.6 x 1.0
Print settings (Bambu Studio slice for a Bambu Lab H2D dual nozzle, PLA, 0.20 mm Standard profile): - Tray and cone fit on one plate and print upright with no supports - About 2h32m and 82.8 g total (pink 74.2 g + gold 8.7 g) - Colors: blush pink #E8A0A8 for the tray, champagne gold #C9A86A for the cone and inlays. A silk gold PLA looks great for the accent.
Not a toy: small parts.
Descripción original del autor, publicada en Thangs.