Apple Watch Pendant Case - Necklace & Keychain Charm, All Sizes

Wear your Apple Watch like a pocket watch or a pendant. Take the band off, snap the watch into this charm, and hang it from a cord, a chain or your keys. Which file fits your watch FileFitsPrint apple-watch-pendant-charm-se-series-4-6-40mm.stlApple Watch SE (1st, 2nd and 3rd generation) and Series 4, 5 and 6, 40 mm (aluminium)about 18 min, 3.6 g apple-watch-pendant-charm-se-series-4-6-44mm.stlApple Watch SE (1st, 2nd and 3rd generation) and Series 4, 5 and 6, 44 mm (aluminium)about 19 min, 4.0 g apple-watch-pendant-charm-series-7-8-9-41mm.stlApple Watch Series 7, 8 and 9, 41 mm (aluminium)about 19 min, 3.9 g apple-watch-pendant-charm-series-7-8-9-45mm.stlApple Watch Series 7, 8 and 9, 45 mm (aluminium)about 20 min, 4.2 g apple-watch-pendant-charm-series-10-11-42mm.stlApple Watch Series 10 and 11, 42 mm (aluminium)about 19 min, 3.7 g apple-watch-pendant-charm-series-10-11-46mm.stlApple Watch Series 10 and 11, 46 mm (aluminium)about 20 min, 4.0 g apple-watch-pendant-charm-series-12-42mm.stlApple Watch Series 12, 42 mm (aluminium)about 18 min, 3.7 g apple-watch-pendant-charm-series-12-46mm.stlApple Watch Series 12, 46 mm (aluminium)about 19 min, 4.0 g apple-watch-pendant-charm-ultra-49mm.stlApple Watch Ultra, Ultra 2, Ultra 3 and Ultra 4, 49 mmabout 29 min, 5.3 g Check the size on the back of your watch or in its settings. The Series sizes are for aluminium cases: titanium and ceramic ones are a little larger and may not fit. The keyring picture is an AI-generated illustration made from the model's own renders; every other picture is a render of the files themselves. Fit - Every size is drawn from Apple's own dimensional drawing for that model, so it follows its exact outline and side. - The Apple Watch SE 40 mm size has been test-printed on a real Apple Watch. The others are drawn the same way from their own drawings and have not been printed yet: if one is tight or loose, say so in the comments and it gets fixed. - It follows the curve of the side and holds it past its widest point, so it snaps in and stays in. - On the Series 12 the front lip is shallower: Apple asks cases to keep further clear of its glass. - Nothing touches the glass. The screen, crown, side button, microphone, speaker and the back (sensors and charger) all stay uncovered, so you can charge it without taking it out.

Putting it on Take the band off. Hook the side without the crown in first, then press the crown side down until it snaps. Printing - Print it front up (as the file is oriented), so the face you see never touches the bed. - Supports: on, tree supports (about 0.3 g), only inside the side openings; none touch the front. - PLA, 0.4 mm nozzle, 0.12 mm layers: 18 min to 29 min and 3.6 to 5.3 g on a Bambu Lab P1S, depending on the size.

Files - An STL and a 3MF for every size, named for the watch it fits (the table above): watertight, ready for any slicer - A Bambu Studio project for the first size, with the profile used for the numbers above

Apple Watch is a trademark of Apple Inc. This is an independent accessory, not made or endorsed by Apple. Made with AI-assisted tools (PrintForge) and checked for printing.