Apple Watch Charging Dock – Built-in Cable Storage

Dock. Charge. Tidy. A charging stand with built-in storage for excess cable — for a tidy desk or bedside table. - Tidy cable storage inside the dock.

- Size-specific versions for your Apple Watch.

- Easy to print without supports.

Choose your dock Select your watch generation first, then its case size. All sizes below refer to the watch. You will need the matching Apple Watch charging cable. Apple Watch Ultra 1–4 - Apple Watch Ultra 1–4 · 49 mm · Curved — choose the file containing Ultra_1_to_4_49mm.

This is the version shown in the cover image. Apple Watch Series 6–9 - Apple Watch Series 6–9 · 40–41 mm · Curved — choose 40mm_to_41mm.

- Apple Watch Series 6–9 · 44–45 mm · Curved — choose 44mm_to_45mm.

- Apple Watch Series 6–9 · 45 mm · Curved · Protective cover — choose the file containing Cover1.4mm. Designed for covers around 1.4 mm thick; fit also depends on the cover shape.

These files are designed around the newer charging puck. Apple Watch Series 1–4 Choose 38–40 mm or 42–44 mm, then your preferred shape: Curved, Round or Corner. Look for 1_to_4 and the matching size in the filename. These versions use the earlier charger design. Filename guide: “Curve” and “Cuved” both refer to the Curved design. Printing - Material: PLA or PETG

- Layer height: 0.15 mm

- Infill: 10% Gyroid

- Supports: none

Model files: slice the matching STL or 3MF with your printer and material profile. The Ultra 3MF contains geometry only. Ready-made G-code: only for the Apple Watch Series 6–9 Curved versions in 40–41 and 44–45 mm, using a Prusa MK3S with a 0.4 mm nozzle and PLA. Set up your dock - Seat the matching charging puck in the dock.

- Store excess cable inside and route the remaining cable out without pinching it.

- Connect the charger and place your watch on the dock.

Deutsche Kurzanleitung Version wählen - Apple Watch Ultra 1–4: 49 mm, Curved. Auf dem Titelbild gezeigt.

- Apple Watch Series 6–9: 40–41 oder 44–45 mm, jeweils Curved; für den neueren Ladepuck.

- Apple Watch Series 6–9 mit Schutzhülle: 45-mm-Variante mit „Cover1.4mm“ für etwa 1,4 mm starke Hüllen. Die Passform hängt auch von der Hüllenform ab.

- Apple Watch Series 1–4: 38–40 oder 42–44 mm; Curved, Round oder Corner; für die frühere Ladegerät-Ausführung.

Die Maße beziehen sich auf das Uhrengehäuse. „Curve“ und „Cuved“ in den Dateien bezeichnen beide die Form Curved. Drucken PLA oder PETG · 0,15 mm · 10 % Gyroid · ohne Support. STL oder 3MF mit dem passenden Drucker- und Materialprofil slicen. Die Ultra-3MF enthält nur Geometrie. Die fertigen G-Codes gelten ausschließlich für Apple Watch Series 6–9 Curved in 40–41 und 44–45 mm auf dem Prusa MK3S mit 0,4-mm-Düse und PLA. Einrichten - Passenden Ladepuck einsetzen.

- Überschüssiges Kabel im Inneren verstauen und ohne Quetschen herausführen.

- Ladegerät anschließen und Uhr auflegen.

Share your make Share a Make with your watch model, dock version and filament to help others choose their setup. GiantBrain · CC BY-NC-ND 4.0