Amethyst Fantasy Sword | 150 mm, No Supports
por Mu Makes en Printables
A 150 mm fantasy sword split into two flat halves, so it prints with no supports. Glue together with filament pins.
Licencia
Solo uso personalCC BY-NC 4.0 — Atribución, no comercial
Puedes imprimirlo y modificarlo para uso personal dando crédito. No se permite vender las impresiones.
Al descargar aceptas respetar la licencia y dar crédito a Mu Makes.
Archivos (3)
- Categoría
- Cosplay y props
- Formatos
- 3MF, STL
- Descargas
- 0
- Publicado
Sobre este modelo
A 150 mm fantasy sword with a gem in the crossguard and a crown-shaped pommel. It is split down the middle into two flat halves, so each half prints with no supports. Glue them together afterwards. Assembly: - Each half has three 2.1 mm dowel holes
- Cut three 5.5 mm pieces of 1.75 mm filament as alignment pins
- Glue the halves together
Print notes: - Tested on Bambu Lab P2S, 0.4 mm nozzle, PLA
- 0.08 mm layers for the fine details, 3 walls, 10% gyroid infill
- Ironing on top surfaces, no supports
- Both halves are on one plate. About 150 mm long
- Mine is plain white. Paint it purple and gold for the amethyst look.
Files: a ready-to-print 3MF for Bambu Studio and both halves as STL. How it was made: the base shape was generated with AI, then cleaned up, split and prepared by hand for printing. All photos are real prints from my P2S. Commercial use: this model is for personal use only (CC BY-NC). If you'd like to sell prints, please send me a message to discuss a commercial license. ☕ Enjoying this model? You can support my work with a coffee: https://buymeacoffee.com/mumakes
Descripción original del autor, publicada en Printables.
