Airsoft RPG-26 Aglen
por p98486884 en Thingiverse
WORKING Replica of the RPG-26 Disposable Anti-Tank Weapon! Parts: 30" of 3" PVC Pipe. (Or any tube with ID of 3" and OD of 3.5") 11.811" (300mm) of 0.5" PVC Pipe 5 M3 Screws that are around 30mm long. 4 M3 Nuts A sheet of sandpaper (Around 200-60 grit will work) Hobby Knife Screwdriver Epoxy...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a p98486884.
Archivos (24)
- Rear_Seal.stl STL · 182 KB
- Front_Seal.stl STL · 454 KB
- Rear_Assembly.stl STL · 664 KB
- Front_Sight_Mount.stl STL · 62 KB
- Front_Sight.stl STL · 67 KB
- Rear_Sight.stl STL · 359 KB
- Trigger_Assembly.stl STL · 113 KB
- Rear_Seal_Clips.stl STL · 320 KB
- Mid_Ring.stl STL · 62 KB
- Front_Seal_Cap.stl STL · 136 KB
- Plate.stl STL · 142 KB
- Small_Trigger.stl STL · 8 KB
- BEFFY_Trigger.stl STL · 7 KB
- Rear_Sight_Adjuster.stl STL · 231 KB
- Threaded_Piece.stl STL · 891 KB
- Shell.stl STL · 88 KB
- Breech.stl STL · 187 KB
- Shell_Guide.stl STL · 26 KB
- Rear_Breech.stl STL · 24 KB
- Sides.stl STL · 16 KB
- Trigger_Piece_1.stl STL · 8 KB
- Trigger_Piece_2.stl STL · 12 KB
- Shell_Extractor.stl STL · 58 KB
- RPG-26___РПГ-26.pdf PDF · 717 KB
- Categoría
- Para tu impresora
- Formatos
- STL, PDF
- Descargas
- 229
- Publicado
Sobre este modelo
WORKING Replica of the RPG-26 Disposable Anti-Tank Weapon! Parts: 30" of 3" PVC Pipe. (Or any tube with ID of 3" and OD of 3.5") 11.811" (300mm) of 0.5" PVC Pipe 5 M3 Screws that are around 30mm long. 4 M3 Nuts A sheet of sandpaper (Around 200-60 grit will work) Hobby Knife Screwdriver Epoxy (2-part 5 minute epoxy works well) Small strips of metal that can be bent to reenforce sling mount points. (Optional) More Instructions about assembly are coming soon but it's not hard to build the launcher.
Descripción original del autor, publicada en Thingiverse.
