Saltar al contenido
Centro3D
Menú
Airplane Phone Holder — modelo 3D

Airplane Phone Holder

por Stuart F en Thangs

If you get value from my work, consider supporting me at stu142.com/supportme

Descargar en Thangs

Thangs entrega los archivos a usuarios con cuenta gratuita

Licencia

Solo uso personal

CC BY-NC-SA 4.0 — Atribución, no comercial, compartir igual

Uso personal dando crédito; sin fines comerciales y las modificaciones con la misma licencia.

Al descargar aceptas respetar la licencia y dar crédito a Stuart F.

Archivos (20)
  • 6 mm Airplane Phone Holder.stl STL · 92 KB
  • 7 mm Airplane Phone Holder.stl STL · 92 KB
  • 8 mm Airplane Phone Holder.stl STL · 92 KB
  • 9 mm Airplane Phone Holder.stl STL · 92 KB
  • 10 mm Airplane Phone Holder.stl STL · 92 KB
  • 11 mm Airplane Phone Holder.stl STL · 92 KB
  • 12 mm Airplane Phone Holder.stl STL · 92 KB
  • 13 mm Airplane Phone Holder.stl STL · 92 KB
  • 14 mm Airplane Phone Holder.stl STL · 92 KB
  • 15 mm Airplane Phone Holder.stl STL · 92 KB
  • 16 mm Airplane Phone Holder.stl STL · 92 KB
  • 17 mm Airplane Phone Holder.stl STL · 92 KB
  • 18 mm Airplane Phone Holder.stl STL · 92 KB
  • 19 mm Airplane Phone Holder.stl STL · 92 KB
  • 20 mm Airplane Phone Holder.stl STL · 92 KB
  • 21 mm Airplane Phone Holder.stl STL · 92 KB
  • 22 mm Airplane Phone Holder.stl STL · 92 KB
  • 23 mm Airplane Phone Holder.stl STL · 92 KB
  • 24 mm Airplane Phone Holder.stl STL · 92 KB
  • 25 mm Airplane Phone Holder.stl STL · 92 KB
Categoría
Herramientas
Formatos
STL
Descargas
221
Publicado

Sobre este modelo

If you get value from my work, consider supporting me at stu142.com/supportme

Airlpane phone holder that also works with different devices. Clips onto the tray or sits on top of the tray. Consisted of two slim pieces instead of a thick one for easier storage and less space required during travel.

The Measurement in the file name is the phone slot width.

Simply Measure the thickness of your device and select it from the range of options available.

Examples: - Switch = 15 mm phone stand - phone depends on the case but generally around 12 mm is good

PETG is Suggested to allow some flex and durability but PLA worked fine for me for one trip.

My Print Settings: - minimum 3 perimieters - 10% infill - 0.2 mm layer height - Brim

Materials Used (Affiliate):

Polymaker Polylite PETG Teal: Amazon (https://geni.us/r1CFN3E)

Descripción original del autor, publicada en Thangs.

Más de Herramientas

Ver todo