Advent Calendar Number Tags 1–24 (Hanging Round Tags)

Description Make your own advent calendar with these 24 round number tags. Each tag is a 50 mm disc with a raised rim, a recessed face, and a large, raised serif number in a Century Schoolbook style. A rounded loop with a 5 mm hole at the top lets you hang the tag on twine, ribbon or a wire, or attach it to small bags, boxes, jars or envelopes. Features - 24 tags: numbers 1 to 24, one model per number

- Classic Century-style serif numbers, easy to read

- Raised number inside a recessed face, protected by a rim

- Loop with 5 mm hole for string, ribbon or a small ring

- Flat on the bed, no supports required

Dimensions - Disc diameter: 50 mm

- Total length including loop: about 57 mm

- Base thickness: 2 mm

- Rim and number height: 3 mm in total (number is raised 1 mm from the recessed face)

- Number height: about 23 mm

- Loop hole: 5 mm

Printing tips (suggestions) - Print flat with the loop and base on the bed, no supports needed.

- Layer height 0.2 mm works well. A 0.4 mm nozzle is fine.

- For a two-colour look, change the filament at a height of 2.0 mm: the base stays in colour 1, and the rim and number turn out in colour 2.

- Any filament works. PLA is a good choice for indoor decoration.

- Check the hole after printing and clean it up if needed before threading your string.

Files The tags are provided as STEP files (1.stp to 24.stp), so you can edit them in your CAD software. Import them into your slicer or convert them to STL or 3MF.