Adjustable Laptop Stand (14" Laptops)

Adjustable Laptop Stand (14" Laptops) The main intention behind this design was to elevate a laptop to better match the height of external monitors in a multi-monitor setup. The stand was designed with 14" laptops weighing approximately 3.5 lbs in mind. The stand offers three adjustable angles: 22.5°, 45°, and 67.5°. These angles are intended primarily for positioning and elevating the laptop screen rather than for typing directly on the laptop. This stand is designed for a stationary desk setup. Choose your preferred angle during setup, then tighten the bolts to secure it in place. The stand is intended to remain assembled on your desk rather than be folded away after each use. The retaining lip at the front of the stand is 15 mm tall. Parts Required - 2× M5 counterbore bolts (25 mm minimum thread length) - 2× M5 nuts (locknuts recommended) - 4× M3 countersunk bolts (15 mm thread length) - 4× M3 nuts

Recommended Print Settings - Layer Height: 0.2 mm - Wall Count: 4 - Supports: None - Infill: 20%