Acorn Napkin Nest | 橡果餐巾小窝

两颗高低错落的橡果由底座连成一件，可夹放干燥折叠纸巾、布餐巾或席位卡。中心截面最窄净隙约7.232 mm，从该喉口到底部的保守夹持深度约28.935 mm。圆壁并非矩形槽，请先核对折叠厚度，不保证夹紧。不是食品接触容器，未经洗碗机验证；场景中的餐巾不包含在模型内。 尺寸：63.81 × 49.70 × 51.67 mm (X × Y × Z) 保持直立、平底朝下。检查帽沿、侧叶及果柄下方支撑，并确认切片后中央缝隙仍畅通。 本页模型文件：model.stl、model.3mf 封面为基于实际模型参考图生成的AI数字场景，辅助检查视图为实际几何渲染，均非实物照片；尚未实体试打。本页模型下载仅含所列STL和通用3MF。STL无颜色；通用3MF包含几何与显示色，不是切片工程，也不是打印机即用文件。独立Orca参考工程不在本页提供；本页也不附Blender源文件、生成脚本或G-code。打印前请按自己的机型、耗材与供料槽检查颜色和支撑，并重新切片。 原创设计及署名：TechABJ / 理工阿白菌。许可：CC BY-NC-SA 4.0，署名、非商业性使用、相同方式共享。请保留作者署名与作品名称。 Two unequal acorns share a fused base and a central slot for dry folded paper or cloth napkins, or a place card. The narrowest center-section clearance is about 7.232 mm, with a conservative 28.935 mm depth from that throat to the floor. Curved walls do not form a rectangular pocket. Check folded thickness; a snug fit is not guaranteed. This is not a food-contact container and is not dishwasher-rated. The napkin in the scene is not part of the model. Dimensions: 63.81 × 49.70 × 51.67 mm (X × Y × Z) Print upright with the flat base down. Inspect support under the caps, leaf and stems, and confirm the central gap remains clear in the sliced preview. Model files: model.stl, model.3mf The cover is an AI-generated digital scene based on actual model reference renders. The inspection views are renders of the actual geometry. None are photographs of physical prints. No physical print test has been performed. Model downloads on this page contain only the listed STLs and generic 3MF. STL has no color; the generic 3MF carries geometry and display colors, not a slicer project or printer-ready file. A separate Orca reference project is not included on this page. Blender source files, generation scripts and G-code are not included here. Set up your actual printer, materials and feeder slots, inspect colors and supports, and re-slice before printing. Original design and attribution: TechABJ / 理工阿白菌. License: CC BY-NC-SA 4.0, Attribution–NonCommercial–ShareAlike. Retain the creator credit and model title. https://creativecommons.org/licenses/by-nc-sa/4.0/