60% keyboard case with plate for BM60 RGB Poker V2

This upload contains a split, skeletonized 60% keyboard case and a matching split 2 mm plate. Both parts use flush, vertically seated dovetail-style interlocks so the halves can be printed separately and assembled with their undersides flush. Compatibility CASE: The case is intended for the BM60 family and other compatible GH60-style 60% tray-mount PCBs. Check your PCB's USB position and mounting-hole pattern before printing if it is not a BM60 RGB Poker V2. PLATE: The included plate is only for the Poker-layout BM60 RGB Poker V2. It is not a universal plate for every BM60-family layout. The plate preserves the original 285.374 x 94.926 x 2.0 mm envelope and all 65 original switch, stabilizer, and mounting openings. Included files - Left and right skeletonized case halves - Left and right print-oriented 2 mm Poker plate halves - Combined QIDI Studio 3MF project for the case - Reference and completed-build photos Hardware and heat-set inserts - Heat-set inserts are NOT required for this release. - The case bosses have approximately 2.0 mm pilot bores and are designed to use the keyboard's original M2 tray-mount screws directly in the printed plastic. - Start with M2 x 4 mm screws. Use M2 x 5 mm only if your PCB/plate stack requires the extra engagement, and verify that the screw does not bottom out. - Do not force brass inserts into the existing bosses. A typical optional M2 heat-set insert is approximately 3.2 mm outside diameter x 4 mm long, which is not compatible with the current 2.0 mm bores. An insert-equipped version would require the bosses and bore diameter to be revised for the exact insert manufacturer's specification before printing. - You will still need a compatible BM60-family PCB, switches, stabilizers, keycaps, USB cable, and the appropriate M2 mounting screws. The included plate specifically requires the Poker layout. Assembly and printing notes - The case and plate halves seat vertically; align the male tabs above the female sockets and lower them into place. - The plate uses three 6 mm-reach drop-in locks with 0.20 mm socket clearance. - Dry-fit every interlock before using adhesive or permanently installing the electronics. - Use good first-layer calibration and elephant-foot compensation so the sockets remain clear. - The oval openings in the skeletonized case are intentional weight-reduction and ventilation features. The rear rounded opening provides USB access. - The case and plate have been physically assembled as shown in the photos. Long-term joint strength has not been characterized; dry-fit before adhesive. Search tags 60% keyboard case; 60 percent keyboard case; 60% keyboard plate; 60 percent keyboard plate; BM60 case; BM60 RGB; Poker V2; GH60 case; mechanical keyboard case; split keyboard case; skeletonized keyboard case; Poker keyboard plate. Attribution The case is a significant modification of the BM60/GH60 case by Thingiverse user Niemnic (Thingiverse model 6129147), originally licensed CC BY-SA. This version adds organic skeletonization, a split seam, and flush interlocking joints. The plate is a split interlocking modification of the supplied 60-Percent_Standard_Plate_2mm.stl source.