3D Printable Bike Brake
por MikePrintsFood en Thingiverse
Have you ever needed an extra bike brake? Unless you modify/work on bikes or you are me, it seems unlikely. Here's a good idea: ditch the boring brakes and print out your own!!! Only the Left Side (front brake) for now, but do let me know if anyone wants a reversed version. This is a modification...
Licencia
Uso comercial permitidoCC BY-SA 4.0 — Atribución, compartir igual
Puedes usarlo y modificarlo dando crédito; las versiones modificadas deben compartirse con la misma licencia.
Al descargar aceptas respetar la licencia y dar crédito a MikePrintsFood.
Archivos (4)
- Categoría
- Jardín
- Formatos
- STL
- Descargas
- 9,848
- Publicado
Sobre este modelo
Have you ever needed an extra bike brake? Unless you modify/work on bikes or you are me, it seems unlikely. Here's a good idea: ditch the boring brakes and print out your own!!! Only the Left Side (front brake) for now, but do let me know if anyone wants a reversed version. This is a modification of a brake assembly found online! UPDATE 4/23/14: I have added configurations for both left hand and right hand brakes Brake Lever has been optimized to print flat on the build plate, as recommended by yzorg. No support needed! UPDATE 12/17/14: Added strengthening rib feature to the connector part. This is intended to reduce flexing when the brake lever is pulled. Let me know how it works!
Descripción original del autor, publicada en Thingiverse.
