32 Ford Inspire Hotrod Cab - FDM Friendly
por Jason Suter en MyMiniFactory
This is a FDM-friendly version of my Hot Rod design (the original was designed for SLS printing).
MyMiniFactory entrega los archivos a usuarios con cuenta gratuita
Licencia
Solo uso personalMyMiniFactory Exclusive - Credit - Remix - Noncommercial
Licencia de MyMiniFactory: puedes imprimirlo y remezclarlo dando crédito, sin fines comerciales.
Al descargar aceptas respetar la licencia y dar crédito a Jason Suter.
Archivos (13)
- Floor Plate Preferably Laser Cut From Aluminium.stl STL
- Frame Rail Preferably Laser Cut From Aluminium.stl STL
- Frame Rail Split Front Preferably Laser Cut From Aluminium.stl STL
- Frame Rail Split Rear Preferably Laser Cut From Aluminium.stl STL
- Front Shock Mount Preferably Laser Cut From Aluminium.stl STL
- Ossum Hotrod Body.stl STL
- Ossum Hotrod Firewall.stl STL
- Ossum Hotrod Roof.stl STL
- Radiator Cover 001.Stl STL
- Radiator Profile Preferably Laser Cut From Aluminium.stl STL
- Rear Shock Bracket Preferably Laser Cut From Aluminium.stl STL
- Suspension Link Bracket Front Preferably Laser Cut From Aluminium.stl STL
- Transmission Tunnel 001.Stl STL
- Categoría
- Repuestos
- Formatos
- STL
- Descargas
- 9,438
- Publicado
Sobre este modelo
This is a FDM-friendly version of my Hot Rod design (the original was designed for SLS printing).
If you appreciate the countless hours of work that a project like this takes then please consider leaving a tip so that I can buy more parts and design new builds.
I strongly recommend printing in ABS or PETG for strength (ABS does tend to warp on such large thin prints, but if you can get it to work then bonding the roof with acetone will result in a really strong body).
There is a significant chunk of support material needed under the hood in front of the windshield, everywhere else is support-free. I chose to do it this way to keep strength and reduce warping.
Follow my page on Facebook to keep up to date with new designs.
UPDATE: By request I have also uploaded the parts that I designed for laser cutting, they can be printed, but won't be very strong.
Descripción original del autor, publicada en MyMiniFactory.
