2 Jaw Angular Gripper
por 3D Printing World en Thangs
This gripper is modeled off my favorite gripper, PHD's GRB's angle gripper. The gripper arms rotate 90 degrees by pushing/pulling the center rod. The center rod has a pivot pin connected to each finger so when you push the rod it rotates the fingers.
Thangs entrega los archivos a usuarios con cuenta gratuita
Licencia
Revisa las condicionesCCNC LICENSES - NO DIV -NO REPOST
El autor usa su propia licencia. Revisa sus condiciones en la página original antes de compartir, modificar o vender.
Al descargar aceptas respetar la licencia y dar crédito a 3D Printing World.
Archivos (7)
- ANGULAR GRIPPER-CLEVIS.stl STL · 84 KB
- ANGULAR GRIPPER-FINGER.stl STL · 165 KB
- ANGULAR GRIPPER-ROD.stl STL · 656 KB
- ANGULAR GRIPPER-TOOL.stl STL · 145 KB
- ANGULAR GRIPPER-ASSY.stl STL · 2,5 MB
- ANGULAR GRIPPER-BODY-1.stl STL · 612 KB
- ANGULAR GRIPPER-BODY-2.stl STL · 585 KB
- Categoría
- Varios
- Formatos
- STL
- Descargas
- 82
- Publicado
Sobre este modelo
This gripper is modeled off my favorite gripper, PHD's GRB's angle gripper. The gripper arms rotate 90 degrees by pushing/pulling the center rod. The center rod has a pivot pin connected to each finger so when you push the rod it rotates the fingers.
You dont get as much clamp force with this type of gripper as a traditional parallel jaw gripper but in some applications it could save an axis of moment and its very fast.
Required Fasteners: (7X) M3 x 16mm Lg. Socket Head Cap Screws (7X) M3 Hex Nuts
A set of gripper tooling is provided but additional tooling made for your application and can be mounted utilizing the M3 screws.
Note: Assembly model for reference only. ___ Support and Licensing If you would like to help support more free models, or get permission to sell physical copies of my models, consider joining my [Patreon]( https://www.patreon.com/3dprintingworld)
Descripción original del autor, publicada en Thangs.
